Company News

Harting Inc.

1370 Bowes Rd., Elgin, IL, 60123, USA

  • 877-741-1500

Latest New Product News from
Harting Inc.

Mounting & Attaching Products

Han® 3A Connectors meet IP 65/67 protection standards.

January 11, 2017

Featuring narrow external geometry, termination in holding area, Han® 3A connectors are available in EMC electrically conductive, M- and plastic versions. Allowing connectors to be configured with any contact insert, Harting M25 cable glands cover clamping range of 9-18 mm.

Read More

Portable Tools, Test & Measuring Instruments

Work Tools facilitate connector assembly.

January 28, 2016

Aligning with connector products for both large form factor industrial and board level connectivity, Tightening Torque Tools offer fixed torque of 0.5 Nm, making it almost impossible to over- or under-tighten. Slimline Screwdrivers are suited for assembly with integration of insulation at blade diameter. Offered in battery-operated or manually operated models, Panel Punches make it possible to... Read More

Electrical Equipment & Systems, Electronic Components & Devices, Mounting & Attaching Products

Modular Connector brings IP69K protection to splash zones.

October 6, 2015

Han® F&B connector series brings modular, user-configurable connectivity with IP69K protection to splash zone (Zone 2) in food and beverage production. Made of non-toxic PP plastic, these FDA 21-approved circular connectors exhibit resistance to chemicals, heat, cold and Ecolab-certified cleaning agents. End-users can select from 25 Han® 3A contact inserts for transmitting power (up to 40... Read More

Electronic Components & Devices

Slim Design M12 Connectors come in female version.

August 5, 2015

Available in standard and Slim Design models, M12 X-Code Connectors are suited for factory automation and transportation where they deliver optimum performance for high-speed 1–10 Gigabit Ethernet communications. Female and male versions of Slim Design connectors have 16.5 mm external diameter for high-density integration. Providing 8-wire interfaces for carrying data, Slim Design connectors... Read More

Fluid & Gas Flow Equipment, Mechanical Components and Assemblies

IP67 Bulkhead Housing Sets New Connector Baseline.

July 2, 2015

In locked state, Han® B IP67 bulkhead mounted housings provide IP66 and IP67 protection to allow temporary, full immersion in water. Flange protects gasket seal, preventing water from penetrating connector, while circumferential collar prevents seal from sliding inwards or outwards and thereby provides additional protection against water ingress. Available in 6B, 10B, 16B, and 24B sizes,... Read More

Electrical Equipment & Systems

Ethernet Cabling System meets all device connectivity needs.

April 27, 2015

Suited for installations in cramped spaces or junction boxes, Ha-VIS preLink® is based on terminal block that user wires separately, then snaps securely into any one of 7 mating profiles: RJ45, PushPull RJ45, M12 D-coded, M12 X-coded, RJ45 HARTING Industrial Form Factor, RJ45 Keystone, and preLink® extender. Wires are inserted into termination block according to color codes, and special... Read More

Electronic Components & Devices

DIN 41612 Male Connectors accommodate dense electronics demands.

March 31, 2015

DIN 41612 male connectors in build type 3Q and 3R are suitable for use with mezzanine and cable to circuit board applications together with type 3B and 3C female connectors. Available for soldering technology, SMC (Surface Mount Compatible), or press-in technology, connectors offer 20 or 30 contacts each in 2.54 mm grid space and can handle up to 2 A per contact. Products are tested in accordance... Read More

Electrical Equipment & Systems

Connector Sets suit explosion proof applications.

March 30, 2015

Available in series of five size 3 A sets, each comprised of hood, housing, and high pin count insert, Han® Ex Industrial Connectors are used exclusively in intrinsically safe circuits of categories ia, ib, and ic of explosion protection method Ex i. Units are suitable for Zones 0, 1, and 2 for gas and Zones 20, 21, and 22 for dust. Offered with 4, 7, 8, or 12 contacts, connectors come... Read More

Electrical Equipment & Systems

Industrial Connectors make distribution lines pluggable.

March 30, 2015

Available with Han-Yellock® as well as other Han® series connectors, Bridge Block makes multiplication in connector possible. Bridging function replaces terminal blocks in switching cabinet and is installed in connector quickly with low demands on space. Bridge block is offered in 3 sizes of Han-Modular® inserts with up to 15 Han E® contacts. Compatible with HanModular® hinged... Read More

Electrical Equipment & Systems

Overmolded Cable Assemblies serve data and signal applications.

December 15, 2014

M8 versions (3- and 4-pole) and M12 A-code assemblies (4-, 5- and 8-pole versions supporting 2–12 contacts) come in single- and dual-ended units with straight/straight, straight/angled, and angled/angled connectors. With 12 poles, M12 assemblies include double-ended versions of same connector, male/female straight version, and male and female single-ended assemblies. Overmolded 7/8 in.... Read More

Electrical Equipment & Systems

Power Connectors feature RFID-equipped housings.

September 22, 2014

With passive UHF RFID-equipped housings, Han® HPR Heavy Duty Power Connectors enable users to track data they define, such as part numbers for requisitioning or purchasing replacements. Integrated transponder has 1 m read range and IP68/69K protection. Offered in 6B, 10B, 16B, and 24B sizes, connectors protect against harsh weather, extreme temperature fluctuations, and corrosive liquids.... Read More

Electrical Equipment & Systems

Modular Connectors expand versatility via monoblock inserts.

July 9, 2014

Han-Eco® and Han-Yellock® feature dedicated, high-density monoblock inserts that let one connector replace bigger or multiple connectors. Han-Eco monoblock E inserts with screw termination use Han E contacts with wire protection. Monoblocks carry 500 V and 16 A ratings and have pre-leading PE contact. Contact numbers of 10, 14, 20, and 28 plus PE are available for 4 respective housing... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Miniature SMT Connectors deliver wire-to-board flexibility.

May 15, 2014

Designed for pluggable single conductor wiring of I/O signals, har-flexicon® series offers 2 pitch categories. Traditional 3.5–5.08 mm sizes have standard contact spacing, screw or push-in (spring cage) wire termination, and SMC termination to board. For finer pitch, 1.27 mm size with IDC offers tool-free termination for single wires, while 2.54 mm size includes connector and terminal blocks... Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems, Green & Clean, Mounting & Attaching Products

Fully Managed Ethernet Switches integrate PROFINET I/O stack.

April 10, 2014

Designed for mounting on top-hat rails, Ha-VIS mCon 3000 Next Generation (NG) switches can be incorporated into existing and new PROFINET applications and also work with other industrial Ethernet-based protocols. Configuration is possible via Web interface, CLI, SNMP, or multifunction button on front. While 3080-A with eight 10/100Base-T(X) RJ45 ports, 3102-AASFP has eight 10/100Base-T(X)... Read More

Electrical Equipment & Systems

Cable Cutting Tool facilitates polymer optic fiber assembly.

June 9, 2011

Han® PushPull SCRJ POF Assembly Tool (Part No. 09 35 000 9913) simultaneously strips and cuts both single optical fiber conductors via circular knife. Precision of cut on front face of optical fiber is such that there is no need for subsequent polishing. Permanently integrated in gripper, mechanical counter registers number of steps performed. Replaceable cutting unit can be used for 1,200+... Read More

Computer Hardware & Peripherals

PoE Switches operate from -40 to +70°C.

June 9, 2011

Designed to meet EN 50155 and EN 50121-3-2 standards, Ha-VIS 4000 Series features vibration-tested M12 interface, enabling integration of cameras and wireless access points into network. Unmanaged and managed switches offer 2 operating modes: plug and play and plug and play with application-specific configuration of PoE functions. With managed PoE switches, individual PoE devices can be booted up... Read More

Electrical Equipment & Systems

Power Supply/Redundancy Modules enhance system availability.

December 11, 2009

Ha-VIS pCon 2000 series includes 24 V, 35 W output pCon 2035-24; 24 V, 120 W output pCon 2120-24; and 48 V pCon 2120-48 power supply modules. Designed for applications in control and switch cabinets, each features pluggable connections for reliable and accelerated assembly without tools. To ensure redundancy in power supply of control and switch cabinet components, pCon 2010-DRM features 2 power... Read More

Electrical Equipment & Systems

Axial Screw Connectors enable field assembly.

December 10, 2009

Suited for automation and drive technology, Han® Q 4/2 Connectors offer optional wiring technology that eliminates need for special tools. Power contacts for rated current of 40 A are connected with standard hex key, while signal contacts, designed for rated current of 10 A, feature Han-Quick Lock® termination technology, which requires standard screw driver. Inserts fit IP65 housings of... Read More

Electrical Equipment & Systems, Fluid & Gas Flow Equipment

M12 Connectors meet Cat 6A requirements.

December 10, 2009

Meeting requirements profiles stipulated by Cat 6A, har-speed M12 connectors suit applications with high bandwidths in machine and plant engineering where accelerated and safe data transmission beyond Cat 5 are desired. Products are based on PAS 61076-2-10x, which defines uniform mating face for 8-pole M12 connectors. Mating face performs 2 tasks: shielding in connector area and coding of mating... Read More

Electrical Equipment & Systems, Electronic Components & Devices

RJ45 Connector requires no tools for connection.

December 10, 2009

Featuring future-proof design for 10 Gigabit Ethernet, HARTING RJ Industrial® 10G utilizes insulation displacement terminal technology designed for rigid and flexible conductors with broad range of wire cross-sections. Cables with diameters from 4.5-9 mm are securely fixed in place with cable gland. Field-installable IP20 model is also suitable for multiport RJ45 jacks. Read More

Other Company News from
Harting Inc.