Gardner Bender
Milwaukee, WI 53201
Share:
Fish Tape offers pull rating of 100 lb.
Cable Snake(TM) features formed handle, 25 ft low-memory carbon-steel tape that does not curl when extended, and wedge-shaped tip that permits wires to be fished under carpets, through walls, and over drop-ceilings. Rewind knob allows tape to be wound up quickly after each use. Cable Snake(TM) is suited for short-run wiring jobs such as installation of electrical boxes, outlets, lighting...
Read More »
Fish Tape provides ergonomic design.
UPPERhand(TM) Fish Tape features heavy-duty nylon handle designed to reduce wrist and forearm strain, and interior section that facilitates grip by focusing on palm of hand rather than traditional finger grip construction. Offered in 65, 125, and 250 ft lengths, unit has impact-resistant, ABS housing and corrosion-resistant, plated carbon steel tape.
Read More »
Hand Benders can be used in air or on floor.
Made of heat-treated aluminum, BIG BEN(TM) hand benders incorporate dual sight-line system that allows bending on floor or in air. They include highlighted Benfield(TM) markings and are available in sizes of Ã-½, Ã-¾, and 1 in. Other features include Vise-Mate(TM) conduit vise; bend-back channel that corrects over-bends; Benfield-style, 30Ã-
Read More »
Hand Bender features dual sight-line system.
Heat-treated aluminum BIG BEN(TM) Hand Bender is available in Ã-½, Ã-¾, and 1 in. sizes. It features Benfield(TM) markings to simplify work; Vise-Mate(TM) conduit vise, which holds conduit when cutting or reaming; bend-back channel that corrects over-bends; and Benfield-style, 30Ã-
Read More »
Staples match color-coded NM cable.
ColorCode(TM) series plastic and insulated metal staples are color-coded to simplify inventory management and help electrical inspectors review work efficiently. Plastic staples are available in 1/2 in. size for 2-conductor cable and 3/4 in. size for 3-conductor cable. Insulated metal staples are 1/2 in., with 1 in. legs, and 9/16 in., with 1-1/4 in. legs. Plastic staples feature HDPE straps and...
Read More »
Connectors and Lugs are UL listed and CSA certified.
Copper split-bolt connectors suit 16-000 AWG conductors. Aluminum split-bolt connectors can be used with 16-0000 AWG copper/aluminum conductors. Available in single- and dual-conductor versions, aluminum mechanical lugs accept conductors from 14 AWG-250 MCM. Aluminum splicer-reducers join wires of similar gauge or transition from larger to smaller wires. Copper mechanical lugs are suited for...
Read More »
Products optimize wire performance in harsh environments.
GB Xtreme(TM) wire terminals, lugs, primary wire, and cushion clamps withstand exposure to moisture, petrochemicals, acids, alkalis, UV rays, vibration, and salt water. Built from nylon, tin-plated copper, annealed stainless steel, and EPDM, products are suited for outdoor lighting, pool, irrigation, mower, pump, and likewise harsh environments. Terminals have nylon insulation that remains...
Read More »
Cable Puller is designed for light to medium-duty pulls.
Designed for continuous pulls to 2,000 lbs, Mini Brutus(TM) uses Rigid(TM) or mini-CollinsÃ-® pipe threader as its power drive unit. Unit is capable of pulling up to 18 ft/min and includes multi-position, adjustable arm that extends over 9 ft, allowing cable pulls from any direction. Self-contained design includes collapsible, two-part, powder coated frame (44 x 13Ã-½ x 18 in.); 5Ã-½...
Read More »
Conduit Cutter offers auto blade return.
Model GPC-125 PVC Conduit Cutter severs flexible, watertight flexible, and schedule 40 PVC conduit 1/2 to 1-1/4 in. Auto blade return allows blade to be exposed only during cutting, and safety release button can manually disengage blade. GPC-125 offers comfort squeeze handle with high leverage ratcheting action to avoid hand fatigue.
Read More »
Wire Connectors are designed for high temperatures.
Hi-Temp Wire Connectors can be used in temperatures up to 150Ã-
Read More »
Fish Tape offers pull rating of 100 lb.
Cable Snake(TM) features formed handle, 25 ft low-memory carbon-steel tape that does not curl when extended, and wedge-shaped tip that permits wires to be fished under carpets, through walls, and over drop-ceilings. Rewind knob allows tape to be wound up quickly after each use. Cable Snake(TM) is suited for short-run wiring jobs such as installation of electrical boxes, outlets, lighting...
Read More »
Fish Tape provides ergonomic design.
UPPERhand(TM) Fish Tape features heavy-duty nylon handle designed to reduce wrist and forearm strain, and interior section that facilitates grip by focusing on palm of hand rather than traditional finger grip construction. Offered in 65, 125, and 250 ft lengths, unit has impact-resistant, ABS housing and corrosion-resistant, plated carbon steel tape.
Read More »
Hand Benders can be used in air or on floor.
Made of heat-treated aluminum, BIG BEN(TM) hand benders incorporate dual sight-line system that allows bending on floor or in air. They include highlighted Benfield(TM) markings and are available in sizes of Ã-½, Ã-¾, and 1 in. Other features include Vise-Mate(TM) conduit vise; bend-back channel that corrects over-bends; Benfield-style, 30Ã-
Read More »
Hand Bender features dual sight-line system.
Heat-treated aluminum BIG BEN(TM) Hand Bender is available in Ã-½, Ã-¾, and 1 in. sizes. It features Benfield(TM) markings to simplify work; Vise-Mate(TM) conduit vise, which holds conduit when cutting or reaming; bend-back channel that corrects over-bends; and Benfield-style, 30Ã-
Read More »
Staples match color-coded NM cable.
ColorCode(TM) series plastic and insulated metal staples are color-coded to simplify inventory management and help electrical inspectors review work efficiently. Plastic staples are available in 1/2 in. size for 2-conductor cable and 3/4 in. size for 3-conductor cable. Insulated metal staples are 1/2 in., with 1 in. legs, and 9/16 in., with 1-1/4 in. legs. Plastic staples feature HDPE straps and...
Read More »
Connectors and Lugs are UL listed and CSA certified.
Copper split-bolt connectors suit 16-000 AWG conductors. Aluminum split-bolt connectors can be used with 16-0000 AWG copper/aluminum conductors. Available in single- and dual-conductor versions, aluminum mechanical lugs accept conductors from 14 AWG-250 MCM. Aluminum splicer-reducers join wires of similar gauge or transition from larger to smaller wires. Copper mechanical lugs are suited for...
Read More »
Products optimize wire performance in harsh environments.
GB Xtreme(TM) wire terminals, lugs, primary wire, and cushion clamps withstand exposure to moisture, petrochemicals, acids, alkalis, UV rays, vibration, and salt water. Built from nylon, tin-plated copper, annealed stainless steel, and EPDM, products are suited for outdoor lighting, pool, irrigation, mower, pump, and likewise harsh environments. Terminals have nylon insulation that remains...
Read More »
Cable Puller is designed for light to medium-duty pulls.
Designed for continuous pulls to 2,000 lbs, Mini Brutus(TM) uses Rigid(TM) or mini-CollinsÃ-® pipe threader as its power drive unit. Unit is capable of pulling up to 18 ft/min and includes multi-position, adjustable arm that extends over 9 ft, allowing cable pulls from any direction. Self-contained design includes collapsible, two-part, powder coated frame (44 x 13Ã-½ x 18 in.); 5Ã-½...
Read More »
Conduit Cutter offers auto blade return.
Model GPC-125 PVC Conduit Cutter severs flexible, watertight flexible, and schedule 40 PVC conduit 1/2 to 1-1/4 in. Auto blade return allows blade to be exposed only during cutting, and safety release button can manually disengage blade. GPC-125 offers comfort squeeze handle with high leverage ratcheting action to avoid hand fatigue.
Read More »
Wire Connectors are designed for high temperatures.
Hi-Temp Wire Connectors can be used in temperatures up to 150Ã-
Read More »