Vortab Company
San Marcos, CA 92078
Flowmeter measures flare gas for oil/gas offshore platforms.
Featuring microprocessor-based programmable transmitter and thermal mass flow sensing element with 316 SS and nickel-braze construction, Model GF90 measures combustible hydrocarbon waste gases with sensitivity down to 0.25 sfps. Transmitter can store up to 3 calibration groups, which can be independently configured for calibration range, fluid, and switch point setting. Designed for complex...
Read More »FCI Thermal Mass Flow Switches and Flow Meters Receive IEC Approval
Precision Flow Instruments for Air, Gas and Liquid Service San Marcos, CA-June 29, 2007-Designed for precision flow switching and flow measurement in rugged industrial applications, FCI's FLT93 Switch, ST98 Flow Meter, and GF90 and GF92 Flow Meters have received IEC/IECx approvals for their safe use from the International Electrotechnical Commission (IEC). The IEC prepares and publishes...
Read More »Multi-Point Flow Meter withstands abrasive environments.
Designed for CEMS pollution control applications, Model MT91 has chromium-carbide coating that protects it from dirty, abrasive, and hot particulates. Unit measures complex stack gas flows in accordance with clear air regulatory requirements and provides signal outputs of 4-20 mA, 0-5 Vdc, 1-5 Vdc, and 0-10 Vdc. Able to operate in environments up to 850Ã-
Read More »Sanitary Flow Switch features non-intrusive design.
Suited for control of liquids, specialty gases, or air in high-purity and sanitary processes, inline NuTecÃ-® FS2000L employs solid-state, temperature-compensated thermal mass flow sensor that installs flush inside pipe ID. General-purpose switch is available with electropolish finish of 20 or 10 Ra for service in line sizes from 0.5-2.0 in. It is accurate to Ã-
Read More »Flow Switch minimizes pump maintenance.
FlexSwitchÃ-® Flow/Level/Temperature (FLT) Pump Protection Flow Switch helps prevent overheating caused by sudden, unexpected reductions in media flow rates. Capable of monitoring substances such as liquids, gases, and slurries, solid-state product offers dual alarm capability for low-flow (0.01-3 fps) and dry running conditions. Dual-function instrument, specified in insertion or in-line...
Read More »Air/Gas Flow Meter offers wireless communication option.
Suited for wastewater aeration treatment applications in line sizes from 2-24 in., ST50 has built-in wireless IR technology for obtaining measurements, making setting changes, and reading trouble shooting codes from PDA. It comes with interface software for download into any Palm-OS based PDA and utilizes temperature-compensated, thermal dispersion flow sensing element. Along with various I/O...
Read More »Flow Meter is offered with wireless communication option.
Designed for use in wastewater lines from 2-24 in., ST50 offers wireless IR option that allows technicians with PDA to obtain measurements, make setting changes, and read troubleshooting codes without opening instrument. Housed in epoxy-coated enclosure, it withstands operational pressures up to 500 psig and media temperatures up to 250Ã-
Read More »Dual Function Switch monitors coolant and lubricant levels.
FlexSwitchÃ-® FLT Series enables monitoring, controlling, and alarming of flow rates or levels for critical fluids used in metals and material processing equipment. Able to survive harsh plant environments, single FLT measures and monitors flow or level and temperature simultaneously. Products are available in insertion and in-line styles for pipe or tube installation. Along with thermal...
Read More »Coriolis Mass Flow Meter has 80,800 lb/hr max capacity.
Featuring U tube flow sensor design, Model CMU is suited for line sizes from 0.25-12 in. and measures flow rates as low as 2.2 lb/hr. Unit provides true mass flow measurement while simultaneously measuring fluid temperature, density, and volumetric flow. Multivariable process measurement tool, with accuracy range of 0.1%-0.15% in liquids and 0.5% in gases Ã-
Read More »Digital Display is available for use with flow meters.
DM20 Digital Display units are incorporated on ST Series mass flow meters for display of air/gas flow measurement data. UL approved, CSA listed and CE certified for industrial environment, they are able to meet wide range of meter installation locations and process requirements. Self-powered by lithium battery with up to 10 year life, DM20 incorporates single line, 8-digit, 0.276 in. high B&W LCD...
Read More »FCI Product Knowledge Workshop Offers Free Training on Thermal Flow Meters and Flow Switches
Biogas, Chemical, Electric Power, Food/Beverage, Landfill, Mining, Oil/Gas, Pharmaceutical, Pulp/Paper, Water, Wastewater San Marcos, CA—August 15, 2019—Fluid Components International (FCI) announces that registration is open for its next free customer training Product Knowledge Workshop, which will take place on October 15-16 in San Marcos, California. This workshop is designed to...
Read More »Flowmeter measures flare gas for oil/gas offshore platforms.
Featuring microprocessor-based programmable transmitter and thermal mass flow sensing element with 316 SS and nickel-braze construction, Model GF90 measures combustible hydrocarbon waste gases with sensitivity down to 0.25 sfps. Transmitter can store up to 3 calibration groups, which can be independently configured for calibration range, fluid, and switch point setting. Designed for complex...
Read More »FCI Thermal Mass Flow Switches and Flow Meters Receive IEC Approval
Precision Flow Instruments for Air, Gas and Liquid Service San Marcos, CA-June 29, 2007-Designed for precision flow switching and flow measurement in rugged industrial applications, FCI's FLT93 Switch, ST98 Flow Meter, and GF90 and GF92 Flow Meters have received IEC/IECx approvals for their safe use from the International Electrotechnical Commission (IEC). The IEC prepares and publishes...
Read More »Multi-Point Flow Meter withstands abrasive environments.
Designed for CEMS pollution control applications, Model MT91 has chromium-carbide coating that protects it from dirty, abrasive, and hot particulates. Unit measures complex stack gas flows in accordance with clear air regulatory requirements and provides signal outputs of 4-20 mA, 0-5 Vdc, 1-5 Vdc, and 0-10 Vdc. Able to operate in environments up to 850Ã-
Read More »Sanitary Flow Switch features non-intrusive design.
Suited for control of liquids, specialty gases, or air in high-purity and sanitary processes, inline NuTecÃ-® FS2000L employs solid-state, temperature-compensated thermal mass flow sensor that installs flush inside pipe ID. General-purpose switch is available with electropolish finish of 20 or 10 Ra for service in line sizes from 0.5-2.0 in. It is accurate to Ã-
Read More »Flow Switch minimizes pump maintenance.
FlexSwitchÃ-® Flow/Level/Temperature (FLT) Pump Protection Flow Switch helps prevent overheating caused by sudden, unexpected reductions in media flow rates. Capable of monitoring substances such as liquids, gases, and slurries, solid-state product offers dual alarm capability for low-flow (0.01-3 fps) and dry running conditions. Dual-function instrument, specified in insertion or in-line...
Read More »Air/Gas Flow Meter offers wireless communication option.
Suited for wastewater aeration treatment applications in line sizes from 2-24 in., ST50 has built-in wireless IR technology for obtaining measurements, making setting changes, and reading trouble shooting codes from PDA. It comes with interface software for download into any Palm-OS based PDA and utilizes temperature-compensated, thermal dispersion flow sensing element. Along with various I/O...
Read More »Flow Meter is offered with wireless communication option.
Designed for use in wastewater lines from 2-24 in., ST50 offers wireless IR option that allows technicians with PDA to obtain measurements, make setting changes, and read troubleshooting codes without opening instrument. Housed in epoxy-coated enclosure, it withstands operational pressures up to 500 psig and media temperatures up to 250Ã-
Read More »Dual Function Switch monitors coolant and lubricant levels.
FlexSwitchÃ-® FLT Series enables monitoring, controlling, and alarming of flow rates or levels for critical fluids used in metals and material processing equipment. Able to survive harsh plant environments, single FLT measures and monitors flow or level and temperature simultaneously. Products are available in insertion and in-line styles for pipe or tube installation. Along with thermal...
Read More »Coriolis Mass Flow Meter has 80,800 lb/hr max capacity.
Featuring U tube flow sensor design, Model CMU is suited for line sizes from 0.25-12 in. and measures flow rates as low as 2.2 lb/hr. Unit provides true mass flow measurement while simultaneously measuring fluid temperature, density, and volumetric flow. Multivariable process measurement tool, with accuracy range of 0.1%-0.15% in liquids and 0.5% in gases Ã-
Read More »