Electro-Sensors, Inc.
Minnetonka, MN 55343-9108
Analog Shaft Tachometer exhibits plug-and-play functionality.
Without requiring any user calibration, ST420 detects magnetic pulses from rotating shaft-mounted pulser disc or wrap. Shaft speed monitor, with 18 mm dia, uses quartz crystal-based digital processing to convert pulses to smooth, continuous 4-20 mA analog signal directly proportional to pulse frequency. Magnetic pulse detector, signal processing capability, and 2-wire, loop-powered, 4-20 mA...
Read More »
Electro-Sentry(TM) Hazard Monitoring Solution Combines Multiple Points of Monitoring into One Easy to Use System
October 2007 Electro-Sensors, Inc. has introduced the Electro-Sentry(TM) Hazard Monitoring System, which combines shaft speed, belt alignment and bearing temperature measurement all into a single solution. With simple, straightforward installation and no end-user calibration necessary, components are ready to use right out-of-the-box. Also, Electro-Sentry utilizes standard 4-20mA signals, as...
Read More »
Shaft Speed Sensors feature stainless steel housing.
SpeedTalker DN-BH measures shaft rpm along with status of up to 4 under/over speed alarms over DeviceNet network. It incorporates sensing and shaft speed analysis for real-time maintenance feedback and machine diagnostics. With product, users can monitor speeds of numerous rotating shafts and anticipate problems before they occur. Compact, 18 mm, NEMA 4X-rated barrel housing withstands industrial...
Read More »
Vibration Monitors have explosion-proof housing.
Designed to minimize risk of equipment damage, VS-XP Series detects under- and over-vibration conditions. Cast aluminum housing is suited for hazardous locations, and adjustable vibration alarm trip-point can be used for machine shutdown or operator warning. Able to detect vibration velocities from 0.10-26 ips rms, product features adjustable set-point delay to prevent false trips; selectable...
Read More »
Speed Sensor is DeviceNet enabled.
SpeedTalker DN Sensor with speed switch functionality detects operating speed as well as under-speed and over-speed of rotating shafts via DeviceNet. Suited for hazardous environments, sensor is enclosed in explosion-proof housing with plated steel mounting bracket. It features open style connector and operates in any DeviceNet network without additional I/O terminals or adapters.
Read More »
Speed Sensor is powered by 5 to 24 Vdc.
Suited for monitoring speed of gear-teeth, spokes, or keyways, HE950 incorporates dual Hall-Effect sensing and signal processing. Capable of operating across various target sizes, product produces digital pulse signal for use with speed switches, tachometers, counters, and signal conditioners or as direct pulse input into PLCs. Unit provides NPN Open Collector output, true zero-speed operation up...
Read More »
Slide Gate Monitor provides feedback of gate/valve position.
In order to provide accurate control of gate position when loading/unloading or blending bulk materials, SG1000 provides feedback to external device such as PLC or Slide Gate Display. Monitor is available in 2 models: SG1000A, which provides 4-20 mA analog output, and SG1000DN, which interfaces with DeviceNet networks. Capable of measuring slide gate or valve position from 0-100%, unit helps...
Read More »
Bracket Assembly simplifies speed switch installation.
Model EZ-SCP Easy Mount Bracket Assembly facilitates fast mounting of SCP Series speed switches, in new and retrofit installations including explosion-proof and waterproof applications. It is coupled directly to shaft, yet hangs freely and moves with shaft to compensate for performance variables caused by excessive movement or vibration. Bracket includes 2 sealed bearings, stainless steel shaft,...
Read More »
Vibration Monitor uses LED indicators to lower risk.
Model VS1 detects both under- and over-vibration conditions. Weighing only 12 oz, unit adds little mass to machine vibration being measured to improve sensing accuracy. Monitor has cast-aluminum NEMA 4x enclosure. Range of vibration velocities can be adjusted from 0.10 to 2.20 in./sec rms, with set-point delay that can be adjusted from 1 to 10 sec to prevent false trips. Unit detects velocities...
Read More »
Potentiometer offers integrated digital display.
Multi-function Accu-Dial, with 4-digit LCD display, provides visual confirmation of set points. Precise 10-turn potentiometer mounts through 0.375 in. hole and has 3-wire connection to allow for retrofitting. LCD display, with 0.000 to 9,999 range, can be calibrated in any user-defined units. Programming is accomplished via 2 push-buttons on front panel of unit. All calibration data is stored in...
Read More »Electro-Sensors, Inc. Acquires Wireless Hazard Monitoring Product Line from Harvest Engineering Inc.
MINNETONKA, Minn.– Electro-Sensors, Inc. (Nasdaq: ELSE) announced today it has acquired the advanced wireless hazard monitoring product line from Harvest Engineering Inc. ( Harvest ). Electro-Sensors will market and sell the new hazard monitoring products under its new HazardPRO™ product line and manufacture and service them at its Minnetonka, Minnesota facility. The creation of the...
Read More »Electro-Sensors Adds to Management Team and Board of Directors
Electro-Sensors Adds to Management Team and Board of Directors, and Announces Temporary Suspension of Quarterly Dividend • Appoints David L. Klenk as CEO, Adds Scott A. Gabbard to Board of Directors, Temporarily suspends Quarterly Dividend Minnetonka, MinnesotaÃ- – Electro-Sensors, Inc. (NASDAQ: ELSE), a leading global provider of machine monitoring sensors and hazard monitoring systems,...
Read More »Electro-Sensors, Inc. Announces Sale of the AutoData System Division
MINNETONKA, Minn., Oct. 12, 2011 - Electro-Sensors, Inc. (Nasdaq: ELSE) (the Company ) announced today that the Company has sold its AutoData Systems Division to Auto Data Inc., a new corporation owned by a group of investors who intend to add personnel and resources in order to further grow the business. Presently, the AutoData Systems business develops and distributes desktop software for...
Read More »
Analog Shaft Tachometer exhibits plug-and-play functionality.
Without requiring any user calibration, ST420 detects magnetic pulses from rotating shaft-mounted pulser disc or wrap. Shaft speed monitor, with 18 mm dia, uses quartz crystal-based digital processing to convert pulses to smooth, continuous 4-20 mA analog signal directly proportional to pulse frequency. Magnetic pulse detector, signal processing capability, and 2-wire, loop-powered, 4-20 mA...
Read More »
Electro-Sentry(TM) Hazard Monitoring Solution Combines Multiple Points of Monitoring into One Easy to Use System
October 2007 Electro-Sensors, Inc. has introduced the Electro-Sentry(TM) Hazard Monitoring System, which combines shaft speed, belt alignment and bearing temperature measurement all into a single solution. With simple, straightforward installation and no end-user calibration necessary, components are ready to use right out-of-the-box. Also, Electro-Sentry utilizes standard 4-20mA signals, as...
Read More »Electro-Sensors Receives Nomination for Excellent Customer Service and Support
Minnetonka, MN-December 15, 2006-Electro-Sensors, Inc., is proud to announce it has been nominated for a place on Machine Design's Customer Service Honor Roll. Minnetonka, MN based Electro-Sensors manufactures machine monitoring and motor control products, and was one of 16 finalists whose customers nominated it for the award. Readers were asked to select those companies whom they felt were the...
Read More »
Shaft Speed Sensors feature stainless steel housing.
SpeedTalker DN-BH measures shaft rpm along with status of up to 4 under/over speed alarms over DeviceNet network. It incorporates sensing and shaft speed analysis for real-time maintenance feedback and machine diagnostics. With product, users can monitor speeds of numerous rotating shafts and anticipate problems before they occur. Compact, 18 mm, NEMA 4X-rated barrel housing withstands industrial...
Read More »
Vibration Monitors have explosion-proof housing.
Designed to minimize risk of equipment damage, VS-XP Series detects under- and over-vibration conditions. Cast aluminum housing is suited for hazardous locations, and adjustable vibration alarm trip-point can be used for machine shutdown or operator warning. Able to detect vibration velocities from 0.10-26 ips rms, product features adjustable set-point delay to prevent false trips; selectable...
Read More »
Speed Sensor is DeviceNet enabled.
SpeedTalker DN Sensor with speed switch functionality detects operating speed as well as under-speed and over-speed of rotating shafts via DeviceNet. Suited for hazardous environments, sensor is enclosed in explosion-proof housing with plated steel mounting bracket. It features open style connector and operates in any DeviceNet network without additional I/O terminals or adapters.
Read More »
Speed Sensor is powered by 5 to 24 Vdc.
Suited for monitoring speed of gear-teeth, spokes, or keyways, HE950 incorporates dual Hall-Effect sensing and signal processing. Capable of operating across various target sizes, product produces digital pulse signal for use with speed switches, tachometers, counters, and signal conditioners or as direct pulse input into PLCs. Unit provides NPN Open Collector output, true zero-speed operation up...
Read More »