Dynasonics
Racine, WI 53406
Share:
Transit Time Flow Meter works with cleaner liquids.
Portable TFXP uses 2 transducers, which function as ultrasonic transmitters and receivers, to measure liquids containing moderate amounts of suspended solids or aeration. Compatible with piping systems Ã-½ in. and higher, product utilizes dual time-base time expansion algorithm, DSP, and digital cross-correlation. It features tactile keypad, optional removable 200,000-event data logger, and...
Read More »Ultrasonic Transducer Clamps Onto Outside of Small Pipes
Dynasonics DTTS transducer series is designed to provide easy, low cost installation on pipe and rigid tubing sizes from 1/2 (12mm) to 2 (50mm). When matched with any Dynasonics Transit Time transmitter it can replace mechanical flow meters in applications where liquid conditions tend to damage or impede mechanical flow meter operation. The DTTS series does not contact the internal liquid and has...
Read More »
Doppler Flow Meter reaches stable reading within seconds.
Using non-invasive transducer, hand-held UFX Flow Meter provides fluid velocity assessment without opening pipe. It contains 2 piezoelectric crystals within one transducer to transmit ultrasonic energy into fluid stream and receive reflected energy off discontinuities within moving liquid. Measuring fluid velocities from 0.3-30.0 fps, meter operates on metal or plastic pipes containing liquids...
Read More »Ultrasonic Flow Meters measure liquid flow in full pipes.
Clamp-on Doppler Series DFX measures flow in pipe sizes larger than 1/8 in. and flow rates from 0.15 to greater than 30 fps. Intelligent software algorithms monitor incoming signal quality and flow meter performance, making adjustments to nullify changing liquid conditions. Digital mixer circuit is immune to measurement errors caused by electrical noise and other ultrasonic products. Systems...
Read More »
Ultrasonic Transducer Set suits hazardous environments.
Intrinsically Safe, clamp-on Series DTTN is certified for use in Class 1 Division 1, Groups C and D hazardous environments. Two high-frequency barriers permit RF signals to transmit back and forth to transducers, while preventing potentially explosive levels of dc or ac voltage from passing through to hazardous area. Transducers are suited for liquid flow measurement on closed fixed pipe systems...
Read More »
Ultrasonic Flow Transducer measures flow in small pipes.
Series DTTS Small Pipe Clamp-On Ultrasonic Flow Transducers, designed for use with Transit Time Flow Meter systems, fit pipe sizes from Ã-½-2 in. With no moving parts, they are suited for clean liquids as well as liquids with moderate amounts of suspended solids or aeration. Products clamp on outside of existing pipe systems to obtain accurate flow measurement. When paired with flow meters,...
Read More »
Flow Meter measures non-aerated, homogenous liquids.
Series TFXM multi-pipe, multi-path, clamp-on flow meter uses time of flight ultrasonic technology. Non-invasive unit installs by clamping transducers to outside of pipes ranging from 2-100 in. Each measurement channel contains integral 4-20 mA, dual-relay, and RS485 communications. Optional WindowsÃ-®-based UltraLink(TM) software and infrared adapter allow complete programming and calibration...
Read More »
Ultrasonic Flow Meter provides non-invasive flow measurement.
Model TFXP Portable Transit Time Ultrasonic Flow Meter measures piping systems from 2-100 in. Used primarily for liquids, it can also measure liquids containing moderate amounts of suspended solids or aeration. Clamp-on unit has no moving parts for maintenance-free operation. Optical interface allows operation of WindowsÃ-® software utility. Model TFXP runs on 24-hr, continuous use...
Read More »
Clamp-On Flow Meter replaces mechanical meters.
Series TFXL Ultrasonic Transit Time Clamp-on Flow Meter uses time of flight ultrasonic technology to measure any liquid containing less than 40% total suspended solids or aeration. Non-invasive unit clamps on outside of existing carbon steel and copper pipes ranging in size from Ã-½-2 in. Meter provides 2 flow rate outputs; 4-20 mA analog and choice of simulated turbine meter or TTL-pulse...
Read More »DYNASONICS Adds BIM Files
Dynasonics incorporates BIM into TFX Ultra product line March 1, 2011 - Dynasonics, division of Racine Federated Inc., has developed Building Information Modeling (BIM) files in support of its TFX Ultra Flow and Energy meters. Each BIM file provides detailed product information for architects, engineers, and contractors, to assist in the design and construction of building and automation systems....
Read More »Dynasonics New Logo
Dynasonics introduces new logo to complement future advancements January 1, 2011 - Dynasonics, division of Racine Federated Inc., is unveiling a new divisional logo. 2011 will be a critical year in Dynasonics' growth and development, with the introduction of new products, including an innovative ultrasonic hybrid portable flow meter, and new market expansion. Its new logo was designed to reflect...
Read More »New Literature for Dynasonics' Series MFX Tip Redesign
Dynasonics, a division of Racine Federated, Inc., introduces its new brochure for the Series MFX Insertion MagProbe(TM). The six-page informative brochure highlights the features and benefits of the redesigned tip on this flow meter. The front page of the booklet lists a brief summary of the hot-tapped insertion magnetic probe, as well as bullet points of its features. The next page focuses on...
Read More »
Transit Time Flow Meter works with cleaner liquids.
Portable TFXP uses 2 transducers, which function as ultrasonic transmitters and receivers, to measure liquids containing moderate amounts of suspended solids or aeration. Compatible with piping systems Ã-½ in. and higher, product utilizes dual time-base time expansion algorithm, DSP, and digital cross-correlation. It features tactile keypad, optional removable 200,000-event data logger, and...
Read More »Ultrasonic Transducer Clamps Onto Outside of Small Pipes
Dynasonics DTTS transducer series is designed to provide easy, low cost installation on pipe and rigid tubing sizes from 1/2 (12mm) to 2 (50mm). When matched with any Dynasonics Transit Time transmitter it can replace mechanical flow meters in applications where liquid conditions tend to damage or impede mechanical flow meter operation. The DTTS series does not contact the internal liquid and has...
Read More »
Doppler Flow Meter reaches stable reading within seconds.
Using non-invasive transducer, hand-held UFX Flow Meter provides fluid velocity assessment without opening pipe. It contains 2 piezoelectric crystals within one transducer to transmit ultrasonic energy into fluid stream and receive reflected energy off discontinuities within moving liquid. Measuring fluid velocities from 0.3-30.0 fps, meter operates on metal or plastic pipes containing liquids...
Read More »Top Dynasonics Sales Reps Named For 2005
At a product training seminar, two domestic and two international Dynasonics sales representative companies were honored with top service awards for 2005. They were Power Controls of Colorado, Automatic Controls from Kentucky, Tem Edie of Mexico, and Techno Sangyo from Japan. Dynasonics Director of International Sales John Erskine III presented the award to Fernando Baez of Tem Edie. Tem Edie...
Read More »Ultrasonic Flow Meters measure liquid flow in full pipes.
Clamp-on Doppler Series DFX measures flow in pipe sizes larger than 1/8 in. and flow rates from 0.15 to greater than 30 fps. Intelligent software algorithms monitor incoming signal quality and flow meter performance, making adjustments to nullify changing liquid conditions. Digital mixer circuit is immune to measurement errors caused by electrical noise and other ultrasonic products. Systems...
Read More »
Ultrasonic Transducer Set suits hazardous environments.
Intrinsically Safe, clamp-on Series DTTN is certified for use in Class 1 Division 1, Groups C and D hazardous environments. Two high-frequency barriers permit RF signals to transmit back and forth to transducers, while preventing potentially explosive levels of dc or ac voltage from passing through to hazardous area. Transducers are suited for liquid flow measurement on closed fixed pipe systems...
Read More »
Ultrasonic Flow Transducer measures flow in small pipes.
Series DTTS Small Pipe Clamp-On Ultrasonic Flow Transducers, designed for use with Transit Time Flow Meter systems, fit pipe sizes from Ã-½-2 in. With no moving parts, they are suited for clean liquids as well as liquids with moderate amounts of suspended solids or aeration. Products clamp on outside of existing pipe systems to obtain accurate flow measurement. When paired with flow meters,...
Read More »