Company News

AMETEK Drexelbrook

205 Keith Valley Rd., Horsham, PA, 19044, US

  • 800-553-9092

General Information:
Mike Bayda
USA
Phone: 215-293-4163

Share Like Tweet Add Email

Latest New Product News from
AMETEK Drexelbrook

Sensors, Monitors & Transducers, Test & Measuring Instruments

In-Line Water Cut Monitor features spool piece mounting.

March 26, 2015

Designed for water in oil measurements, Universal IV™ Cut Monitor (CM) replaces spool piece designs installed in field and utilizes industry-standard size sensing element that installs directly into process piping. In-line probe design allows analysis of flowing fluid sample in real-time, while Cote-Shield™ technology ignores coating buildup on probe and puts sensing area of instrument directly into process stream. Monitor is compatible with pressures to 1,000 psi and temperatures to 450°F. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments, Controls & Controllers

Fluid Detector monitors fluid in tanks and piping.

March 13, 2015

Mounting directly into existing pipelines between 2 standard 150 lb flat-faced flanges, Clear Line™ Fluid Detector uses RF admittance to monitor presence or absence of fluid, providing complete assurance that tank is empty. Proprietary Cote-Shield™ circuitry ensures dependable detection regardless of conductive coatings or product build up on sensor. Featuring sanitary, crevice-free design, Clear Line works without recalibration on processes where fluids can vary from organics to caustics. Read More

Test & Measuring Instruments

Radar Level Meters feature modular design.

August 15, 2014

Able to operate from tank roof or recessed space, 2-wire loop-powered DR 2000® Guided Wave Radar Level Meter performs accurate level measurement even when product surface is agitated or covered with layer of foam. Utilizing frequency modulated continuous wave technology, 2-wire DR 5200® Open Air Radar Level Meter provides highest accuracy in non-contact meter. Both modular units are SIL2 compliant to IEC 61508 for safety-related systems and suitable for storage tanks and process vessels. Read More

Test & Measuring Instruments, Controls & Controllers, Sensors, Monitors & Transducers

Non-Contact Level Meter targets solids applications.

July 22, 2014

With frequency modulated continuous wave radar technology, DR6300 Series provides distance, level, volume, and mass measurement of powders, granulates, and other solids. Non-contact, 2-wire, k-band meter offers choice of touchscreens, including tank illustration, bar graph, oscilloscope, signal, and reflectivity screen. Available with drop antenna or horn antenna, device has measuring range of 260 ft and will operate up to flange temperature of 290°F and pressures of 580 psig. Read More

Electrical Equipment & Systems, Communication Systems & Equipment, Electronic Components & Devices

RF Point Level Switch features maintenance-free design.

October 28, 2013

Offering alternative to electromechanical level switches, Z-tron IV™ Point Level Switch features all electronic design with no components to jam, break, or wear out. Cote-Shield™ circuitry allows switch to ignore coatings and build-up on sensing element. Switch reacts only to actual high- or low-level conditions; dust or tunneling will not produce false signal. Featuring integral, one-piece design, switch is installed through single ¾ in. vessel opening. Read More

Test & Measuring Instruments

Water Cut Monitor includes temperature compensation.

October 4, 2013

Accommodating temperatures up to 160°F, Universal IV CM delivers accurate water cut measurement in 0–1%, 0–5%, 0–10%, and 0–30% ranges with accuracy down to 0.03% water and resolution down to 0.0002% water. Perm-A-Seal sensing element installs directly into main process line, and Cote-Shield™ technology ignores coating buildup on probe. Equipped with built-in LCD and keypad, monitor can be configured for NPT or flanged mountings and can be installed in all common pipe diameters. Read More

Test & Measuring Instruments, Controls & Controllers, Machinery & Machining Tools, Sensors, Monitors & Transducers

Water Cut Monitor incorporates temperature compensation.

August 14, 2013

Temperature compensated (TC) version of Universal IV™ CM offers accurate water cut measurement in 0%–1%, 0%–5%, 0%–10%, and 0%–30% water ranges. Accuracy reaches 0.03% water, while measurement resolution is 0.0002% water. Cote-Shield™ technology ignores coating buildup on probe and puts sensing area of instrument directly into process stream. Installed directly into main process line, Perm-A-Seal sensing element utilizes PEEK material and stainless steel sensing rod. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Water Cut Monitor measures fluid properties inside process line.

November 13, 2012

Universal IV CM monitor is accurate to 0.03% water with measurement resolution of 0.0002% water. It takes average of capacitive property of fluid over its entire length, and then onboard electronics compute relationship between capacitance change and water cut. Unit features Perm-A-Seal sensing element, installed directly into main process line, and built-in LCD and keypad. Configurable for NPT or flanged mountings, product also installs in all common pipe diameters. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Water Cut Monitor offers accuracy down to 0.03% water.

November 12, 2012

Equipped with built-in LCD and keypad, Universal IV™ CM Model provides measurement resolution down to 0.0002 % water. Unit features Cote-Shield™ technology, which ignores coating buildup on probe. Extending minimum of 15 in. into process line, sensing element takes average of capacitive property of fluid over its entire length. Probe handles pressures to 1,500 psi and temperatures to 450°F. Configurable for NPT or flanged mountings, Universal IV CM comes pre-calibrated to 1 of 11 pre-set ranges. Read More

Controls & Controllers, Sensors, Monitors & Transducers

Level Transmitter offerse immunity from diverse factors.

July 3, 2012

Featuring worldwide approvals, Universal IV(TM) RF Admittance/Capacitance continuous level measurement transmitter is intrinsically safe, explosion proof, and flameproof. This 2-wire, 4-20 mA loop transmitter features digital HART protocol as well as Cote-Shield(TM) technology and is immune to interference from vapor, dust, foam, and tank obstructions. Along with pushbutton LCD for configuration and monitoring, product features stable, repeatable, and accurate measurement within 0.25% of range. Read More

Controls & Controllers, Electrical Equipment & Systems, Sensors, Monitors & Transducers

Point Level Switch offers SIL-certified overfill protection.

February 4, 2009

Safety IntelliPoint RF(TM) Switch, used in above-ground bulk storage tanks, meets American Petroleum Institute's 2350 Recommended Practice for overfill/spill protection. Specifically, it comes standard with SIL1 certification; SIL2 is optional, and SIL3 is possible with redundant switch. Integral software continuously monitors application for changes and maintains repeatable trip point on probe. Switch detects presence or absence of material without calibration, and MTTF is 110 years. Read More

Sensors, Monitors & Transducers

Cut Monitor measures percentage of water in oil.

August 7, 2006

CM-6 Cut Monitor features Perm-a-Seal sensing element installed directly into main process line, which extends minimum of 15 in. and takes average of fluid capacitive property over entire length. Factory-calibrated and 11 pre-set ranges (0-50% in Light Oil and 0-80% in Heavy Oil) are included. Cote-Shield(TM) enables instrument to ignore pre-determined length of sensor, allowing extension beyond nozzle mounting and pipe elbows for accurate measurement. Read More

Sensors, Monitors & Transducers, Communication Systems & Equipment

Transmitters provide radar-based level measurement.

May 27, 2005

Radar Series DR7000 and Time Domain Reflectometry Series DR7100 incorporate touch screen display with choice of tank illustration, bargraph, oscilloscope, signal, or reflectivity screen. Utilizing FMCW technology, Series DR7000 features 2 MHz bandwidth that allows units to determine true level in tank despite agitated surfaces and vessel obstructions. Series DR7100 uses electromagnetic wave guided by metallic rod or flexible cable to determine distance, level, and volume. Read More

Controls & Controllers, Sensors, Monitors & Transducers

Tuning Fork Switch offers high and low level indication.

May 25, 2005

Series TF-100 provides no-calibration solution to point level measurement of clean liquids and is available with relay, current, or PNP outputs. Made of 316 stainless steel, sensor is offered in standard and sanitary versions. When material level reaches predetermined point on sensing element, it causes change in status in electronic unit, resulting in output that can operate alarms, annunciators, valves, or other controls or indicators. Read More

Sensors, Monitors & Transducers

Level Transmitter offers continuous, ultrasonic performance.

May 25, 2005

Accurate to 0.15%, USonic(TM) Series provides repeatable level measurement of liquids. CPVC construction suits Class I, Div 1 environments with Intrinsically Safe or Explosion Proof installation requirements. Able to handle temperatures from -40 to +158°F and process pressures to 50 psig, transmitter is capable of liquid level measurement to 30 ft with 2-wire, 4-20 mA, HART output signal and comes with integral display and keypad for local configuration. Read More

Electrical Equipment & Systems, Sensors, Monitors & Transducers

Safety Switch suits SIL1, SIL2, and SIL3 installations.

December 14, 2004

IntelliPoint SXRNT Series RF Admittance Point Level Switch offers Auto-Calibration feature that detects presence or absence of material for maintenance-free operation. In-line unit measures liquids, solids, and slurry materials as well as interface between any insulating and conductive liquid. Included software monitors changes in composition, dielectric, or conductivity and maintains repeatable trip point on probe. Read More

Communication Systems & Equipment

Wireless Interface eliminates cable/conduit runs.

August 3, 2004

Wireless Interface Solution provides wireless transmitter/receiver set suited for use in harsh environments and Class 1 Division 2 areas. Utilizing 902-928 MHz ISM band spread spectrum frequency hopping technology, product delivers license-free, interference-free link between remote devices and control room. Transmitters are available in ac and dc power versions, while receiver is offered in dc only and is suitable for DIN-Rail mounting. Read More

Sensors, Monitors & Transducers

Level Sensor self adjusts to media and environment.

May 23, 2003

Ultrasonic, loop-powered, 2-wire Uniscan provides 0.25% accuracy and .11 in. resolution. Four-digit LCD reads out in level and distance of flow rate. Unit is suitable for ranges up to 49 ft in liquids and 28 ft in solids. Intelliscan 4-wire, low voltage unit provides 0.25% accuracy and 0.04 in. resolution. Single instrument can be used to measure liquids, solids, granular, slurry, or open-channel flow, without changing transducer. Read More

  • 1