Munters Corporation - AirTech
Amesbury, MA 01913
Desiccant Dehumidification Unit Restores Lasik Surgery Facilitys Vision for Accuracy
A newly constructed medical facility planned to offer patients corneal refractive (Lasik) surgery to reduce their dependency on glasses or contact lens accomplished by reshaping the cornea with state-of-the-art equipment. But shortly after the facility was completed, surgical procedures were suspended abruptly. The existing HVAC system serving the surgical procedure room couldn't deliver the...
Read More »
Desiccant Dehumidification Restores Lasik Surgery Facility's Vision for Accuracy
A newly constructed medical facility planned to offer patients corneal refractive (Lasik) surgery to reduce their dependency on glasses or contact lens accomplished by reshaping the cornea with state-of-the-art equipment. But shortly after the facility was completed, surgical procedures were suspended abruptly. The existing HVAC system serving the surgical procedure room couldn't deliver the...
Read More »
Munters Energy-Efficient PowerPurge(TM) Option for Desiccant Dehumidification Systems Receives U.S. Patent Approval
Munters Dehumidification Division - Industrial announces that a patent for the company's new PowerPurgeTM energy recovery option available with its Integrated Custom Air Handling (ICA) desiccant dehumidification systems has been approved by the U.S Patent and Trademark Office. The patent has a term of 20 years from April 27, 2004, the filing date of the application. Receiving patent approval for...
Read More »
Humidity Controller cools industrial workplaces.
Humidity Control Unit (HCU) combines cooling and desiccant dehumidification technologies in one system to control dew point temperatures in hot, humid climates. Delivering dew points below 45Ã-
Read More »Air Handling Units incorporate energy recovery system.
Integrated Custom Air Handling (ICA) units in active desiccant dehumidification systems are offered with optional PowerPurge(TM) energy recovery system. PowerPurge collects waste heat off hottest section of desiccant wheel and uses it to help with regeneration, reducing energy required for reactivation while lowering discharge temperature of process air.
Read More »
System remotely monitors/configures HVAC equipment.
ExactAire system allows technicians to monitor and configure operation of temporary dehumidification, cooling, and heating equipment remotely via secure Web site. Compatible with any Munters climate control equipment, system monitors environmental components such as dew point, surface temperature, and RH. System records climate control conditions on onboard memory chip and also transmits them to...
Read More »
Evaporative Cooling Pad keeps workers cool.
With 3 vertical, solid fiber stiffeners to help resist bowing, Fogger Pad provides cooler, drier, cleaner environment. Each pad is 12 in. wide to aid in installation onto building's existing air inlet. Air movement associated with evaporative cooling helps remove odors, excess moisture and gases, and dust and dirt. Product provides cooling for livestock, poultry and plants, and commercial and...
Read More »
Custom Air Handler features double wall construction.
Integrated Custom Air Handler incorporates no-through metal design in either 2.5 or 4 in. wall thickness. Smooth-fitting panels create fewer joints, preventing leaks, while sloping roof eliminates standing rainwater. Doors are available in inward and outward swinging or plug design. Standard options include chilled water piping, refrigeration packages, filtration, full temperature and humidity...
Read More »
Monitoring System offers secure World Wide Web access.
ExactAire system monitors operation of dehumidification, cooling, and heating equipment on job site, and alerts users of control failure. Capable of monitoring dew point, surface temperature, and relative humidity, system permits users to set desired parameters. Customizable alert messages are deliverable via pager, fax, e-mail, PCS, or telephone. Messages include alert condition and location,...
Read More »
Dehumidifier controls humidity independently of temperature.
HCU desiccant dehumidification system treats 100 percent makeup air and works with existing A/C system or energy recovery ventilator (ERV). It controls humidity on as-needed basis, when humidity or temperature levels exceed set point. System removes humidity using combination of DX cooling and desiccant rotor. Nominal flow rate is 1000 scfm, with moisture-removal rate of 37.3 lb/hr at 90 degrees...
Read More »Munters Acquires EDPAC, A Manufacturer of Data Center Equipment, and Strengthens Its Presence in Europe
Munters has acquired EDPAC, an Ireland-based manufacturer of data center cooling equipment and air handling systems for a purchase price of MEUR 29. The acquisition is part of Munters strategy to grow in the prioritized data center segment. Munters is a leader of energy efficient data center cooling solutions in North America and strengthens its presence in Europe through the acquisition. EDPAC...
Read More »Munters Exits U.S. Commercial Market and Expands Data Center Manufacturing
Munters’ Selma, TX, Facility Will Now Service Key Accounts and Provide Additional Production Capacity for Data Center Cooling Products (Selma, TX, August 25, 2020) – In an effort to strengthen its AirTech business and sharpen alignment with its strategic objectives, Munters, a global leader in energy efficient air treatment and climate solutions, will exit the non-core part of the...
Read More »Munters Receives Order for U.S. Lithium Battery Production Facility
(Amesbury, Mass) – Aug. 12, 2020 – Munters, a global leader in energy efficient air treatment and climate solutions, has received an order for a desiccant dehumidification solution, providing a climate with very low humidity, for a U.S.-based lithium battery production facility. This market segment is one of Munters’ prioritized areas for growth. The order has a value of approximately 12...
Read More »Digital Crossroad Chooses Munters for its Renewable Energy Data Center
Digital Crossroad has placed a second order* for Munters to cool its new data center in Indiana. The center covers a space of 105,000 square feet and will run on 100 percent renewable energy by 2028. Digital Crossroad’s new data center in Hammond, Ind., is an example of creatively converting an existing facility into a data center. This particular project is a conversion of a former...
Read More »
Desiccant Dehumidification Unit Restores Lasik Surgery Facilitys Vision for Accuracy
A newly constructed medical facility planned to offer patients corneal refractive (Lasik) surgery to reduce their dependency on glasses or contact lens accomplished by reshaping the cornea with state-of-the-art equipment. But shortly after the facility was completed, surgical procedures were suspended abruptly. The existing HVAC system serving the surgical procedure room couldn't deliver the...
Read More »
Desiccant Dehumidification Restores Lasik Surgery Facility's Vision for Accuracy
A newly constructed medical facility planned to offer patients corneal refractive (Lasik) surgery to reduce their dependency on glasses or contact lens accomplished by reshaping the cornea with state-of-the-art equipment. But shortly after the facility was completed, surgical procedures were suspended abruptly. The existing HVAC system serving the surgical procedure room couldn't deliver the...
Read More »Moisture Control Services' Brown Elected Executive Board President of the Society for Protective Coatings
THE SOCIETY FOR PROTECTIVE COATINGS (September 15, 2010) - Munters Moisture Control Services (MCS) executive Russ Brown has been elected president of the executive board of the Society for Protective Coatings (SSPC), a non-profit association dedicated to the protection and preservation of concrete, steel and other industrial and marine structures and surfaces through the use of high-performance...
Read More »Munters Moisture Control Services Names Kolak President U.S., Canada
August 16, 2010 - Elvir Kolak has been named president for United States and Canada operations for Moisture Control Services (MCS), a division of Munters AB, to provide overall responsibility for the leadership of the division and its more than 200 employees. MCS' global division offers complete services for water and fire damage restoration and remediation, and for temporary climate control in...
Read More »Munters Strengthens Its Leading Position in Dehumidification Equipment for Lithium Battery Production
Lithium battery production is a very demanding application for which Munters can provide optimal process air. A growing segment for Munters is dehumidification equipment for lithium battery production. The most recent example is Saft, a world leader in high technology batteries, who will install ten of Munters energy efficient dehumidification systems at their lithium ion battery facility in...
Read More »Spotten Promoted to National Sales Manager for Munters Moisture Control Services
Russell Spotten has been appointed to national sales manager, surface preparation and coating applications, for Moisture Control Services (MCS), a division of Munters AB. MCS' global division offers complete services for water and fire damage restoration and remediation, and for temporary climate control in construction, industrial, surface preparation and coating, and preservation applications....
Read More »