Company News

AMETEK Test & Calibration Instruments

8600 Somerset Dr., Largo, FL, 33773, US

  • 800-527-9999

General Information:
Poul Madsen
Phone: +45-2030-6470

Share Like Tweet Add Email

Latest New Product News from
AMETEK Test & Calibration Instruments

Test & Measuring Instruments

Multifunctional Test Generator provides transient testing.

June 15, 2015

Equipped with quad core ARM-Cortex A9 processor and 7 in. touchscreen, Model NX5 meets international and product-specific transient and power fail requirements, including EFT/burst to 5.5 kV, surge to 5.0 kV, and power fail testing. Standalone unit includes CE Marking for single-phase EUTs with output supply of 300 V/16 A. Using automatically controlled external coupling/decoupling network with rated current up to 200 A, system tests 3-phase EUTs for added versatility. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Surface Testers measure roughness, contour, and finish.

May 14, 2015

Using diamond stylus that is drawn across part with motorized traverse mechanism, Surtronic Duo offers portable solution for shop floor and on-site measurement of multiple roughness parameters. One-button operation produces set of traceable measurement results including detailed profile graph. With 1 mm vertical range and 16 nm resolution, IntraTouch provides fundamental roughness and waviness parameters, contour and form error analysis, feature exclusion, zoom tool, and full programmability. Read More

Test & Measuring Instruments

Handheld Pressure Calibrator delivers lab accuracy in field.

February 23, 2015

Designed for process control applications, HPC40 Series can replace several gauges or calibrators and provides deadweight tester accuracy in on-site instrument. This mA loop calibrator, suitable for pressures ranging from vacuum to 15,000 psi, delivers accuracy of 0.035% of reading for all ranges and is fully compensated from -20 to +50°C. Latter enables same accuracy whether measuring pressure, current, voltage, or temperature. Use is facilitated via single-layer UI and full-color display.
Read More

Test & Measuring Instruments

Multi-Signal Calibrator features single-layer interface.

July 15, 2014

Featuring portable design, JOFRA ASC-400 provides laboratory accuracy for field calibration, process monitoring, and maintenance functions. Calibrator is capable of sourcing with simultaneous read-back from device-under-test of mA, V, pulsed transmitters, pressure, and temperature. Unit performs automatic switch test, leak test, scaling, and online % error calculation. With single-layer interface, technicians can use as many as 11 different functions without referring to documentation. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Materials Testing Systems incorporate intuitive touchscreen.

January 10, 2013

Using linear guide technology, pre-loaded ball screws, and software compensation systems to promote precision displacement measurement, CHATILLON® CS225 and CS1100 are, respectively, 225 and 1,124 lbf, single-column machines with 180 and 150 mm throat depths. Both machines, used for tensile, compression, sheer, flexural, or multi-stage testing, feature 8.9 in. industrial-grade touchscreen (IP65) designed for continuous operation by users of all levels in production environment. Read More

Test & Measuring Instruments

Pressure Indicator includes data logger functionality.

November 21, 2012

Available in 10 pressure ranges from 15–10,000 psi, JOFRA® IPI Mk II combines ease of analog gauge with accuracy and display of digital calibrator. Portable unit features ±0.05% FS accuracy and is temperature compensated for workshop use or in-process applications. Offered as stand-alone indicator or in 1 of 6 test-ready systems, indicator is ATEX and CSA certified for use in potentially explosive environments such as oil refineries, chemical plants, and offshore platforms. Read More

Test & Measuring Instruments

Loop Signal Calibrator is designed for usability, accuracy.

October 10, 2012

Suitable for field and workshop use, JOFRA® CSC101 mA loop calibrator offers 1 µA resolution to meet accuracy demands of sensors and transmitters. Intuitive UI and bright, high-resolution display facilitates use, while step and ramp functions and rotary knob with built-in Enter push function promote functionality. Powered by 6 AAA batteries that provide 40+ hr battery life, this rugged, handheld instrument features fuseless protection against overloads up to 250 Vac.
Read More

Test & Measuring Instruments

Handheld Signal Calibrator works with RTDs, thermocouples.

August 20, 2012

Intended for field calibration and workshop use, JOFRA® CSC201 lets process engineers calibrate 14 types of RTDs and 13 types of thermocouples. Instrument provides ohms, mV, and custom RTD curves and works with pulsed excitation transmitters and PLCs. When used with JOFRA APM external pressure module or JOFRA calibration pump, unit can also measure and calibrate pressure. All functions are displayed on graphical display, and fuseless protection against overloads is rated to 250 Vac. Read More

Test & Measuring Instruments

Materials Testers perform precision displacement measurement.

March 21, 2012

Rated at 5 and 2.5 kN, respectively, single-column Lloyd Instrument LS5 and LS2.5 feature linear guide technology, pre-loaded ball screws, and software compensation systems. Both are available with range of grips, fixtures, and extensometers. LS2.5 system has crosshead travel of up to 1,400 mm and crosshead speed range of 0.01-2,032 mm/min, while LS5 has crosshead speed range of 0.01-1,016 mm/min. Load accuracy is ±0.5 down to 1% of load cell value. Read More


Machine Control Software aids specialty contact lens production.

December 12, 2011

By incorporating complex algorithms, Optoform® control software MCS v1.29 facilitates production of toric, multifocal, prism, and slab-off contact lens designs. Capabilities also help optimize form and surface finish for existing Optoform asymmetric lathe files and allow for contouring of front and back asymmetric edges for better wearer comfort. Solution works with Sterling FTS® 1000 fast tool servo, which offers peak acceleration of 200 m/sec². Read More

Test & Measuring Instruments

Intrinsically Safe Pressure Calibrators have backlit LCD.

November 1, 2011

Delivering laboratory accuracy, JOFRA® HPC550 (single sensor) and HPC552Ex (dual sensor) are suited for use in hazardous oil, gas, petrochemical, and other applications. Both handheld, on-site, field-usable instruments offer user-configurable information display, 15 pressure units, mA input, and percent error calculation. JOFRA HPC552 Ex can handle 2 pressure ranges, and both models feature ATEX/IECEx certification for use in potentially explosive situations. Read More

Test & Measuring Instruments

Handheld Pressure Calibrators feature deadweight accuracy.

May 20, 2011

Compliant with ATEX/IECEx certifications and rated intrinsically safe for potentially hazardous locations, JOFRA® HPC550Ex (single sensor) and HPC552Ex (dual sensor) series are on-site, field-usable instruments with backlit graphical display. Both are temperature compensated from 32-113°F and offer 16 pressure ranges from 0.35-10,000 psi, with FS Absolute, differential, and gauge sensors, and accuracy to ±0.025% of reading and 0.01% FS. Variety of functions and features are standard. Read More

Test & Measuring Instruments

Materials Tester utilizes linear guide technology.

February 4, 2011

Available in 500 and 800 mm travel versions, Model LS1 is suited for materials testing applications under 1 kN force. Single-column unit provides high-precision displacement measurement using linear guide technology, pre-loaded ball screws, and advanced software compensation systems. With extended crosshead speed range of 0.01-2,032 mm/min, tester offers load accuracy of ±0.5 down to 1% of load cell value. Wide throat depth of 180 mm provides large working area for sample placement. Read More

Test & Measuring Instruments

Reference Temperature Calibrator ranges from 91 to 1,292°F.

March 24, 2010

Through triple-zone heating technology, JOFRA® RTC-700 provides precise temperature calibration of sensors, regardless of type and format. Dynamic Load Compensation sensor measures temperature in calibrator's insert and provides feedback to active triple-zone system to compensate for temperature differences resulting from testing various sensors. Offering plug-n-play connectivity, dry-block calibrator includes full-color VGA display and USB connection. Read More

Test & Measuring Instruments

Handheld Pressure Calibrator features built-in electrical pump.

February 9, 2010

JOFRA® HPC 600 works as pressure indicator, pressure calibrator, complete mA loop calibrator (including 24 V), voltmeter, thermometer, and pressure/vacuum generator. Features include user configurable information display, 15 different pressure units, transmitter supply, mA input/output, % error calculation, serial communications, and external pressure module capability. Each unit is temperature compensated from 14-122°F, and international traceable calibration certificate comes standard. Read More

Test & Measuring Instruments

Temperature Calibrator uses dynamic load compensation.

July 27, 2009

JOFRA® RTC-156 dry-block reference temperature calibrator employs dynamic load compensation system for temperature uniformity in insert, regardless of number or size of immersed sensors. Able to perform calibrations over -22 to +311°F range, unit features intelligent sensors that enable plug-and-play connectivity, color VGA display, and USB connection for communications and downloads. Also included, active dual-zone heating helps optimize heating/cooling speeds. Read More


Data Logging Software suits ASM-800 signal multi-scanners.

August 12, 2008

Enabling ASM multi-scanner to be used as data-logging device, JOFRALOG allows logging procedure to be configured for collection of data from up to 24 sensors with data saved in MS Excel(TM)-compatible format. For each scanning application, it also allows configuration, including sensor definitions, for every channel to be stored. Up to 3 ASM units can be stacked to calibrate up to 24 sensors at same time, with JOFRALOG logging data for each sensor. Read More

Test & Measuring Instruments, Retail & Sales Equipment, Display & Presentation Equipment

Graphic Display Module operates from 9-32 Vdc.

July 18, 2008

Sealed to IP67 specifications both front and rear, CAN-Communicator (C-COM) 2 in. gauge can be used by itself or with existing instrumentation by connecting it to SAE J1939 (CAN) data bus. Able to display data directly from vehicle data bus or text and graphics as specified by customer, it has 106 x 56 pixels backlit LCD, dead-fronted warning indicator, and 3 backlit switches. Switch-to-ground output can be used to control external annunciator, relay, or other device. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers, Laboratory and Research Supplies & Equipment

Shear Cell is designed for texture analysis.

July 17, 2008

Designed for TAPlus texture analyzer, Kramer Type Shear Cell can measure bulk shear and extrusion forces of meat, fruit, and cereals where samples have irregular shapes and sizes or forces are too high. It has 5 parallel steel blades, which are driven down through guide slots into rectangular container with corresponding slots in base. Operating from ambient temperature up to 100°C with maximum capacity of 225 lbf and minimum load cell of 22.5 lbf, unit is fitted with spill container. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Digital Force Tester is lightweight and portable.

July 11, 2008

Enabling users to perform simple or multi-variable testing without any computer or complex software, CHATILLON® TCD225 Series consists of console, rugged frame with closed-loop motion control system, and intelligent load sensing system with measuring accuracies better than 0.1% full scale. It collects data at 1,000 samples/sec, and sample rate can be configured from 1-1,000 Hz. Data can be used to plot graphical results or downloaded automatically to any USB flash drive. Read More

Other Company News from
AMETEK Test & Calibration Instruments