Company News

Mettler-Toledo International Inc.

Im Langacher, Greifensee, 8606, Switzerland

  • 41449443385

General Information:
Shariq Sharif
United Kingdom
Phone: +44 (0) 207 014 3500
E-mail this person

Latest New Product News from
Mettler-Toledo International Inc.

sensors, monitors & transducers, test & measuring instruments

Load Cells feature hermetic sealing.

June 12, 2014

Made of nickel-plated carbon steel with hermetic sealing for dusty and humid environments, Models SLB215 and SLB415 cover capacities from 110 kg to 4.4 tons. Model SLB415 has blind-hole design for optimized metrology performance, while Model SLB215 has threaded load introduction to facilitate integration. Fully approved to cover OIML, NTEP, ATEX, and FM standards, beam load cells are suited for weighing in logistics, instruments, and general machine building. Read More

test & measuring instruments

Modular Benchtop Meter measures DO, pH, conductivity, and more.

May 8, 2014

Complementing pH, conductivity, ion concentration, and ORP measurement capabilities, SevenExcellence v2 helps researchers and analysts replace or supplement traditional multi-step dissolved oxygen (DO) measurement methods as well as reduce process waste. Instrument can measure up to 3 parameters in parallel and allows for biochemical oxygen demand (BOD) assessment. Guided UI and 7 in. touchscreen aid operation, while connectivity facilitates results recording and analysis. Read More

sensors, monitors & transducers, test & measuring instruments

Weigh Modules continuously monitor load cell performance.

May 8, 2014

By providing continuous load cell monitoring, SWB605 PowerMount Weigh Modules discover variances before they impact productivity, allowing manufacturers to avoid errors such as load cell overload and out-of-range temperatures. POWERCELL-equipped load cells with on-board microprocessors also adjust weighing signal to compensate for environmental changes. This allows modules to provide accurate weighing regardless of temperature, linearity, hysteresis, and creep. Read More

test & measuring instruments

Small Scale Reaction Calorimeter enhances safety and speed.

March 5, 2014

Allowing generation of reproducible results at small scale, EasyMax HFCal provides critical process information to scientists and engineers early in development process in order to shorten time to market, reduce development expense, and improve safety. This heatflow calorimeter, requiring minimal materials and processing time, provides data on parameters such as heat transfer coefficient, specific heat of reaction mass, reaction enthalpy, thermal conversion, and adiabatic temperature rise. Read More

test & measuring instruments

Moisture Analyzers offer up to 0.1 mg readability.

February 10, 2014

Available with 150 or 200 g capacity MonoBloc weighing cell, Professional moisture analyzers feature USB, Ethernet, and WLAN connectivity; offer built-in instrument tests; and can send reports in A4 or letter format direct to networked page printer. Guided, 5-click procedure allows for qualifying performance of all instruments using SmartCal™ certified reference substance, while Fully Automated Calibration Technology (FACT) adjusts and calibrates balance using internal weights. Read More

computer hardware & peripherals, software, test & measuring instruments

Weighing Terminal offers software for filling and dosing.

December 19, 2013

To avoid inconsistent product quality that can lead to bad batches and wasted materials, Model IND890 is available with software that allows users to monitor and control filling and dosing in industrial applications. Windows-based terminal offers ergonomic weighing and has memory capable of storing 999 sets of target parameters, allowing switchover between processes with little room for user error. Read More

software

Data Communications Software connects to remote weighing terminal.

December 10, 2013

Designed for reliable transfer of crucial process data, IND890com software allows IND890 weighing terminal users to monitor and respond to communications on IND890 from remote PC. Data storage, processing, and analysis capabilities help quality managers and process supervisors make informed decisions to enhance end-product quality. Users can control, switch, and monitor production facilities using single data interface. Read More

test & measuring instruments

Weigh Modules offer solutions for 100% in-process control.

December 2, 2013

Integrated into various machines and instruments, Weigh Modules can be used to check completeness of parts, kits, or modules as well as quality of surface where material is added or subtracted. In automated process, modules can detect violations of weight tolerance of 1 ppm in split second, enabling 100% inspection without sacrificing high throughput. Weigh Modules are tested with traceable weights to comply with TS16949 and ISO9001 standards. Read More

controls & controllers, hvac

Hot Stage Systems feature dual heater furnace design.

November 29, 2013

Offering one click operation, Models HS82 and HS84 provide temperature control or heat flow measurement under microscope. Model HS82 is suited for situations where temperature of very small samples has to be regulated in limited space and where samples have to be observed at same time. For simultaneously recording changes in appearance of sample and calorimetric behavior, Model HS84 is suitable. Both have furnace with heating element beneath and above sample to ensure temperature uniformity. Read More

test & measuring instruments

Single-Channel Transmitter includes ISM functionality.

November 8, 2013

Equipped with full-color touchscreen, multi-parameter Model M800 monitors up to 4 in-line sensors for pH/ORP, conductivity, amperometric/optical oxygen, and turbidity measurement. Intelligent Sensor Management technology offers diagnostic tools that maximize sensor lifetime and ensure measurement reliability. Predictive diagnostics tools such as Dynamic Lifetime Indicator, Adaptive Calibration Timer, and Time to Maintenance indicator are displayed via iMonitor feature. Read More

automatic id, labels, tags, signage & equipment, laboratory and research supplies & equipment, services

RFID Tag-Embedded Pipettes streamline calibration assessment.

October 2, 2013

To support pipette management efforts, premium Rainin air displacement pipettes, including E4 XLS electronic model, feature embedded RFID tags that help labs establish calibration schedules through tracking. Combination of pipettes, RFID reader, and LabX Direct Pipette-Scan software lets users immediately determine individual pipette's complete profile to determine if calibration is needed. User-defined, exportable attributes are housed in 12 customizable data fields on pipette's RFID tag. Read More

sensors, monitors & transducers

Digital Conductivity Sensors monitor chemical concentrations.

September 23, 2013

Capable of measuring conductivity of concentrations ranging from pure potable water to acids or bases, UniCond 4-E Digital Sensors are suited for clean-in-place and desalination processes, deionization regeneration, and wastewater management. Four-electrode units incorporate technology that converts analog signal into digital signal. Intelligent Sensor Management provides plug-and-measure start up at measurement point and sensor diagnostics for proactive maintenance. Read More

laboratory and research supplies & equipment

High-Throughput Pipette eliminates complex programming time.

September 9, 2013

Addressing needs of operators running high-volume biotech experiments, Liquidator 96 allows pipetting in 96- and 384-well plates, PCR plates, 8- and 12-channel reservoirs, and 96-deepwell plates. This bench-scale, 96-channel, manual pipetting solution can be used by lab technicians at any experience level while delivering reproducible results. Suitable for cleanroom conditions, solution also fits any bench-top or laminar-flow cabinet as personal pipetting system. Read More

software

Data Management Software optimizes product traceability.

September 4, 2013

Enabling connection of inspection technologies to remote processing and control locations, ProdX v1.2 streamlines data analysis for food manufacturers, facilitating demonstration of due diligence and product traceability. On-screen user interface lets users track products through manufacturing process, with access to information regarding product rejects and machine performance from all networked systems. Records can be exported to CSV or XML file, enabling further data analysis. Read More

software

Weighing Terminal Software automates filling and blending.

August 15, 2013

Available for IND560 terminals, IND560 fillplus automates material blending, minimizing errors. In addition to programmable spill values and jog functions, fillplus provides rescaling based on percentage of programmed target, percentage of available amount of material in formula, or desired total formula weight. Program enables storage, retrieval, and rescaling of up to 25 formulas, each with its own designated auxiliary output turned on and off based on weight or production time requirements. Read More

test & measuring instruments

Vision Inspection System targets fresh food industry.

May 9, 2013

Available in 200, 300, and 400 mm widths, CLS Series inspects labeling of packages for correct best-before date, lot number, and barcode, guaranteeing due diligence through traceability throughout supply chain. Cameras automatically adjust position for examination of products ranging from 10–200 mm in height. With CIVCore Software, systems can analyze high resolution images at speed of 250 packs per minute. Hygienic open construction minimizes physical contamination of food products. Read More

laboratory and research supplies & equipment, materials & material processing, test & measuring instruments

Combined Titration, IC System accelerates, automates analyses.

April 9, 2013

Offering complete automation for testing properties and ions in drinking, ground, surface, and waste water, Titration/IC (ion chromatography) system increases process efficiency by determining up to 20 different parameters from one sample. All analyses on single sample are completed in 20 min while requiring seconds worth of interaction by operator. After sample testing, entire system is automatically cleaned, eliminating chance of sample carry over. Read More

materials & material processing

Automated Titrator is designed to facilitate use.

March 25, 2013

Designed for basic requirements and first-time users of automatic titrators in food and chemical industries, EasyPlus™ focuses on accurately automating routine titrations. Interface is based on App format to enhance usability, and iTitrate™ guidance leads operators through setup and method programming step-by-step. Also included, EasyDirect™ titration software stores and collates all records and archives data to minimize confusion, errors, and misinterpretation of results. Read More

software

Batch Control Software helps ensure compliance.

March 21, 2013

Available for IND780batch controller, Batch-780 Software controls multi-scale/flow meter batching processes while tracking and tracing in compliance with industry regulations, such as S88 Standard addressing consistent recipe sharing and data handling across multiple locations. Software handles any combination of multi-material filling, manual formulation, blending, or dosing simultaneously on 4 scales or flow meters. Automated generation of history and audit reports provides proof of compliance. Read More

test & measuring instruments

Industrial Compact Scale provides intuitive data handling.

February 21, 2013

With secure data storage and variety of printing/labeling options, Model ICS685 provides accurate tracking and tracing for compliance with manufacturing industry standards such as Odette, Galia, AIAG, and ISO16949. Scale includes embedded article database and transaction memory for weighing and counting results, as well as alibi memory that stores weighing data combined with processing date and time. To help demonstrate accurate weighing during audit, calibration log file stores calibration data. Read More

Other Company News from
Mettler-Toledo International Inc.

April 13, 2012

Webinar Presenting