Company News

Multipix Imaging Ltd.

1 Ridgeway Office Park, Bedford Road, United Kingdom

General Information:
Lynne Potter
United Kingdom
Phone: 0044-0-1730-233332
E-mail this person

Latest New Product News from
Multipix Imaging Ltd.

electrical equipment & systems, test & measuring instruments, vision systems

LED Illumination Systems suit factory automation applications.

September 19, 2014

Consisting of 40 different models, CompaVis™ LED Series supports factory automation and inspection carried out by machine vision systems in automotive, electronics, and pharmaceutical packaging industries. Peak wavelength is 630 nm, which is optimum red wavelength for camera sensitivity and LED output efficiency. Supplied in ring, bar, and square bar models, units operate with 24 Vdc and are available with Harting M12 connector as well as JST connector. Read More

vision systems

Stereo 3D Camera includes Gigabit Ethernet interface.

July 24, 2014

Equipped with two 1.3 megapixel CMOS sensors, Ensenso N20 is suitable for working distances up to 3 m. Projector with blue LEDs, combined with high resolution of sensors, delivers accurate detail and precise 3D data. GigE interface allows cable lengths up to 100 m and Power over Ethernet operation. Measuring 175 x 50 x 50 mm, camera features aluminum housing and screw-on connections. Package includes interface to MVTec HALCON machine vision library and software development kit. Read More

sensors, monitors & transducers, test & measuring instruments

IR Vision Sensors are less prone to environmental influence.

June 4, 2014

Datalogic DataVS2 IR models have embedded LED illuminator with IR emission and ambient light filter that can cut off most light coming from surroundings. These features reduce influence of environmental factors, promoting sensor reliability when dealing with extended operating distances and Fields Of View. Also included, 1.5 software release adds such functionalities to GUI configuration software as QR-Code reading, Chinese language support, sensor setting backup, and inspection downloads. Read More

communication systems & equipment, mechanical components & assemblies

IP Engines are available in 10 GigE and USB3 models.

September 20, 2013

Network Video Connectivity products include GigE Vision IP engine using 10 GigE technology (iPORT NTx-Ten) and compact transmitter enabling accelerated creation of USB3 Vision (iPORT NTx-U3)-compliant cameras. Built on 10 GigE technology and compatible with GigE Vision® and GenICam™ standards, video transmitter enables industrial camera/imaging system designers to transmit images at over 8 Gbps. Embedded camera interface lets camera/imaging device offer real-time video connectivity. Read More

test & measuring instruments, vision systems

Machine Vision Cameras combine ruggedness and versatility.

July 11, 2013

With ruggedized hardware and Impact Software Suite, A30 and T4x series smart cameras are suited for inspection within several industries, including pharmaceutical and food and beverage. Cameras feature CCD imagers and DSP processors, all sealed in industrial hardened IP67 enclosure. Feature set includes resolution from VGA up to 5 MP, Gigabit Ethernet, built-in discrete I/Os, and serial interface. Read More

vision systems

NIR Sensitive GigE Area Scan Cameras come in monochrome models.

March 20, 2013

Monochrome 2 and 4 MP Basler ace CMOSIS GigE cameras are available as NIR-optimized variants with optimized sensitivity at wavelengths of 900 nm. Suited for surveillance, intelligent traffic systems, or biometrics, cameras occupy 29 x 29 mm footprint and offer optimized software trigger functionality for high-speed triggering over GigE bus. Feature set includes partial scan, horizontal mirroring, configurable I/O lines, timestamp, and frame counter. Read More

test & measuring instruments, vision systems

Stereo 3D Camera captures unstructured surfaces.

March 18, 2013

Based on projected texture stereo vision procedure, Ensenso N10 is fitted with 2 global shutter CMOS sensors and pattern projector, which projects random dot pattern onto object to be captured. Unit offers working distances of 280–1,400 mm and can capture both static and moving objects at up to 30 fps. Housed in 150 x 45 x 45 mm aluminum package, camera features USB interface and lockable 3-pin M8 sensor/actuator connector with GPIOs for 12-24 V hardware trigger input and output. Read More

automatic id, computer hardware & peripherals, test & measuring instruments

Industrial 2D Reader supports logistic applications.

March 18, 2013

Through 5 million pixels captured 15 times/second, Datalogic MATRIX 450 meets requirements of both automated and manual material handling with decoding capability on 1D, 2D, Stacked, and Postal symbologies. Each single shot offers enough coverage to scan entire practical area over many slot sorters, cross-belts, tilt-trays, bombay and small-drop systems. For manual applications, imager includes continuous lighting, aiming laser pointers, colored spot indicators, and http live image mirroring. Read More

optics & photonics

Laser Light Modules are designed for machine vision market.

February 11, 2013

Designed for seamless integration into existing systems, 19 mm dia 3D PRO™ Laser and 10 mm dia 3D PRO™ Laser Mini feature cylindrical form factor and are both available either as customer-specified fixed focus module or with adjustable focus. Lasers deliver uniformity with line widths from 30–120 µm, and modules are available with output powers from 1–150 mW, fan angles between 10° and 90°, and wavelengths from 450–910 nm. Several electronic options are also available. Read More

vision systems

Area Scan Cameras feature USB 3.0 interface.

February 11, 2013

Featuring USB 3.0 interface in 29 x 29 x 29 mm housing, ace Area-Scan Cameras can replace older camera models, particularly those with Firewire/IEEE 1394 or USB 2.0 interface. Initial model releases are set to achieve resolutions from VGA to 5 MP and capture up to 120 fps using CMOS and Sony CCD sensors. All are compliant with USB3 Vision standard. Read More

computer hardware & peripherals, optics & photonics, vision systems

Line Scan Cameras are suited for web inspection.

January 24, 2013

Offered with 6K, 8K, and 12K resolutions, 56 mm wide and 62 mm high Basler Racer line scan cameras are available with Gigabit Ethernet or CameraLink interface. Max line rate for 8K model featuring CameraLink interface is 80 kHz. Sensitivity of CMOS sensor technology promotes image quality, with low noise characteristics and quantum efficiency of ~60%. CMOS sensors also help minimize power draw, and their heat dissipation concept helps cameras stay cool. Read More

vision systems

Machine Vision Cameras support USB3 Vision standard.

November 12, 2012

Based on plug-and-play USB3 Vision standard that supports bandwidth speeds in excess of 300 MBps, Balser Ace USB3 Vision series includes models with resolutions of 659 x 494 (90 or 120 fps), 1,296 x 966 (30 fps), 1,628 x 1,236 (20 fps), and 2,592 x 1,955 (14 fps). Housing footprint of 29 x 29 mm and bottom mounting options facilitate replacement of FireWire, USB 2.0, or analog cameras, while I/O flexibility with minimized delay and jitter accommodate applications that require exact timing. Read More

vision systems

IP Cameras integrate edge storage capability.

November 9, 2012

In addition to dome models, Basler IP cameras include box versions with resolutions from VGA to 5 MP and frame rates to 100 fps. Included microSDHC card slot, which provides for local storage of up to 32 GB of data, enables recording of live streams or single camera images in configurable time intervals on SD card. If network failure occurs, camera acts as backup solution by recording video streams to SD card. Read More

computer hardware & peripherals, test & measuring instruments

Frame Grabber can double Camera Link cable length.

October 19, 2012

Suited for high-speed and high-resolution area scan and linescan applications, Grablink Full XR (eXtended Reach) acquisition board incorporates ECCO+ feature that can double max length of Camera Link cables and thereby eliminate need for repeater. ECCO+ offers skew compensation and signal equalization technique to restore the Camera Link signal integrity. Frame grabber also supports Camera Link 2.0 configurations, from 80-bit to Base configurations, and complies with PoCL SafePower. Read More

electrical equipment & systems

Lighting with Controller is suited for machine vision automation.

April 12, 2012

Featuring IP67 industrial sealing as well as 10° spot and 50° flood lens options, NERLITE Smart Series HI-BRITE illuminates small to large areas with LED lighting to provide high-intensity output. NERLITE Smart Series DOAL (Diffuse On-Axis Lighting) illuminators provide diffuse, uniform illumination for flat specular surfaces. For diffuse illumination of surfaces, NERLITE Smart Series Ring lights offer subtle adjustments to working distance and angle of light delivery. Read More

optics & photonics

Thin Line Laser offers various optical configurations.

February 1, 2012

Able to achieve 16 µm line width at 120 mm working distance, InViso Micro from ProPhotonix suits applications requiring extremely thin laser lines. Output beam is referenced to flat mounting surface, ensuring beam is automatically aligned on installation. This consequently removes need for adjustments to ensure precise beam alignment. Also included, external focus mechanism preserves factory set alignment and bore sight settings when adjusting focus without use of complex tools. Read More

communication systems & equipment

Video Transmitter brings analog camera support to GigE networks.

February 1, 2012

Offered as enclosed units and OEM board sets, iPORT Analogue-Pro IP engine allows for high-quality video from analog cameras with low, predictable latency over Gigabit Ethernet (GigE). Video transmitter can encode analog to digital video from up to 2 analog cameras simultaneously and conforms to GigE Vision® and GenICam(TM) standards. Along with full resolution at 30 fps per channel, features include software-controlled GPIO, 2 RS-232 ports, and scalable GigE networking options. Read More

computer hardware & peripherals, optics & photonics, vision systems

Line Scan Cameras come with GigE or Camera Link interface.

November 28, 2011

Using line scan sensors based on CMOS technology, Racer series supports line rates of up to 48 and 80 kHz via Gigabit Ethernet and Camera Link interface options, respectively. Basler Racer cameras start with 2k and 4k models and accommodate many markets and applications. Camera Link models support Power over Camera Link (PoCL), enabling data and power to be transported over same cable. Able to accommodate instances of side-by-side installation, industrial housing measures 56 x 62 mm. Read More

communication systems & equipment, computer hardware & peripherals, mechanical components & assemblies

IP Engines network Sony block cameras.

February 28, 2011

With Pleora iPORT(TM) SB-Pro IP Engines, users can transform Sony block cameras into GigE Vision compliant cameras. Units abstract Sony VISCA protocol into industry-standard GenICam interface over Ethernet. Available as OEM board sets designed for use in variety of housings, IP engines transmit video at up to 1080i resolution and up to 30 frames/sec with low latency. Applications include military and medical imaging systems, intelligent traffic systems, and industrial inspection. Read More

vision systems

Area Scan Cameras feature 2 megapixel resolution.

October 16, 2009

Basler Aviator Area Scan Cameras are offered in 2 models operating at up to 65 fps. They include Kodak CCD sensors, progressive readout, global shutter technology, and Camera Link data interface. GenICam compliant C/C++ high level programming API is also included. Devices are suited for semiconductor manufacturing, electronics manufacturing, metrology, and medical imaging. Read More

Other Company News from
Multipix Imaging Ltd.