Company News

Everlight Electronics Co. Ltd.

NO. 25, LANE 76, SEC. 3, CHUNG YANG RD., TAIPEI, Taiwan

  • +886-2-22672000

Latest New Product News from
Everlight Electronics Co. Ltd.

optics & photonics, electrical equipment & systems, electronic components & devices, labels, tags, signage & equipment, vision systems

High-Speed Logic Gate Optocoupler comes in 8-pin SOP.

September 21, 2015

Suited for serial and field bus interface isolation in industrial applications, single-channel EL071L consists of IR emitting diode optically coupled to CMOS detector IC. SMD device is Pb-free, halogen-free, and RoHS compliant; offers 15 Mbps data transmission rate; and operates from -40 to +110°C. Other features include 3.3 and 5 V CMOS compatibility, CMR of >10,000 V/µsec, 10 kV/µsec min common mode transient immunity, and 3,750 Vrms isolation voltage between input and output.<br /> Read More

electronic components & devices, optics & photonics, vision systems

IR Emitter/PIN Photodiode suit oximeter detector applications.

June 2, 2015

Measuring 6 x 4.8 x 1.1 mm each, IRR60-48C/TR8 SMT Infrared Emitting Diode, together with PD60-48C/TR8 PIN Photodiode feature optimized wavelengths of red 660 nm and infrared 905 nm, enabling accurate oximeter diagnosis. Infrared 905 nm can also be customized upon request to 940 nm or 910 nm. Both IRR60-48C/TR8 and PD60-48C/TR8 are discrete designs which allow feasibility on use, no matter if oximeter requires transmission or reflective design. Read More

electrical equipment & systems, electronic components & devices, vision systems

Automotive LEDs combine efficacy and sulfur resistance.

April 17, 2015

Satisfying automotive application demands, golden Series specifically suits head lamp, DRL, fog lamp, side signal lamp, and rear tail lamp applications. Golden lead frame models A09KU, 67-21U, and 67-31U, deliver sulfur resistance that promotes performance stability. PC Amber LEDs feature 3 chip manufacturing process that results in brightness decay minimized to 15% at 85°C. All products comply with AEC-Q101. Read More

electrical equipment & systems, optics & photonics, sensors, monitors & transducers, test & measuring instruments

Compact Optical Switch suits non-contact switching environments.

April 1, 2015

Integrating GaAs IR LED emitter, silicon NPN phototransistor, and photosensitive receiver optimized for short distances, ITR1201SR10A/TR reflective type opto interrupter offers cut-off visible wavelength of below 700 nm. Double molding manufacturing process results in smooth surface that promotes reliability. With flat, 1.5 mm profile, reflective sensor offers stable collector current and is suited for use in printers, copiers, and scanners as well as non-contact switching environments. Read More

electronic components & devices

Chip-on-Board LEDs facilitate assembly and offer color on demand.

December 29, 2014

XUAN series COBs (36 V) have thermally conductive mirror-aluminum substrate and attach to heatsink by holder or screws. Covering 2&ndash;50 W, MCPCB device can achieve >130 lm/W. There are 7 designs in 1313 and 1919 dimensions with CCTs from 2,700K to 6,500K and CRI ratings of 82, 92, and >97 Ra. In ceramic PCB package, 9, 19, and 29 W Color Choice® (Color on Demand) CHI COBs offer seamless color temperature tunability via 2,700K and 5,700K segments. All mixture points achieve >110 lm/W and CRI >80. Read More

electrical equipment & systems, electronic components & devices, vision systems

Infrared LED targets CCD cameras and surveillance systems.

November 11, 2014

With wavelength of 855 nm, HIR-C19D Series achieves radiant intensity of 350 mW/sr at 700 mA with viewing angle of 90°, providing optimized illumination of area under observation. Pb-free device comes in 3.5 x 3.5 x 2.36 mm SMD package, molded in clear silicone with spherical top view lens, and ceramic PCB housing that ensures low thermal resistance of 11°C/W. Applications include CCD cameras, night guard security, and other discrete surveillance systems. Read More

display & presentation equipment, electrical equipment & systems, electronic components & devices, vision systems

Half to Full Watt LED Series includes 30 V version.

July 30, 2014

Comprising ½&ndash;1 W models, XI3030 High Voltage (HV) LED series helps simplify driver designs by reducing voltage difference between AC input line voltage of completed product and DC input voltage to LED components. Package is lead (Pb)-free, halogen-free, and RoHS compliant. Available in 30 V version (other voltages upon request), LED achieves efficiency of ~120 lm/W at 3000K CCT, 80 Ra min, and 115 lm brightness. It is available either with 7-step ANSI-bin or 3-step central bin. Read More

electrical equipment & systems, electronic components & devices

LED Fog Lights help drivers perceive contrasts.

June 13, 2014

Combining fog light and daytime running light, Argus Series provides clear forward visibility when driving in dense fog or heavy downpours. Single-chip LED sources run on 1 W and produce lighting effect as high as 150 lm with sunlight color temperature of 5,600 K. Available in 3.5 x 3.5, 2.5 x 2.5, and 1.5 x 1.5 mm packages, LEDs are AEC-Q101 certified. Read More

electronic components & devices

Multi-Chip LEDs offer range of power options.

September 9, 2013

Chip-on-board (COB) LEDs of JU series include 7, 10, and 15 W types, in addition to existing 4 W version, that suit directional applications which require single source for illumination. With efficacy of 110 lm/W or more at 3,000K CCT, CRI >80 Ra, and 25°C substrate temperature, models consist of four JU1215 (15 x 12 x 1.6 mm) and one JU2024 (20 x 24 x 1.6 mm) types. Versions are available from ANSI bin 2,700K to 6,500K and offer 3 step (McAdam) options. Read More

electronic components & devices

White LED can be overdriven up to 30 or 60 mA.

June 20, 2013

Featuring lead frame technology with heat slug for heat dissipation, 0.2 W Series 45-21S is suitable for LED light tubes in general lighting applications. Top-view LED provides typical light output of 20 lm in warm white and 22 lm in cool white at 60 mA and achieves luminous output of 26-41 lm at 75 mA. Measuring 3.0 x 2.0 x 0.8 mm, RoHS-compliant device has CRI of greater than 80 Ra and comes in ANSI correlated color temperatures from 2,700&ndash;6,500 K. Read More

electronic components & devices

High-Power 1 W LED serves multiple lighting applications.

June 13, 2013

Suited for lighting-grade LED designs in general and residential lighting applications, XI3535 comes in 3.5 x 3.5 x 0.65 mm housing constructed of thermally efficient package material with thermal resistance of 15°C/W. Top-view white LED, offered in ANSI CCT ratings from 2700K&ndash;6500K, exhibits light efficacy of 109/115 lm/W (warm/cool white) at 350 mA and 3 V with >80 CRI; 150 mA and 6 V versions are also available. Typ high flux output is at 105/110 lm, and typ viewing angle is 115°. Read More

electronic components & devices

Infrared LEDs suit remote controls and touch panels.

June 12, 2013

With 1.2 mm height, IR26-71C Series consists of 940 nm side-view SMD infrared LEDs with radiant intensity of 5 mW/sr and 8 mW/sr or more at 20 mA. Viewing angle of 50° ensures that remote control does not need to be directly pointed towards receiving device. Based on similar package design, IR26-61C IRLEDs have 1.2 mm height and viewing angle of 20° for use in 5&ndash;32 in. optical touch panel applications. Read More

electronic components & devices

Infrared LEDs suit intelligent touch panels, proximity sensors.

June 7, 2013

Intended for proximity sensor applications as well as optical touch panels, 2 top view SMD 850 nm LEDs include HIR89-01C with 30° viewing angle and radiant intensity of 55 mW/sr at 70 mA as well as HIR91-01C/L297 with 40° viewing angle and intensity of 40 mW/sr at 70 mA. For side-view touch applications smaller than 80 in., HIR83-01B is supplied in SMD package and features radiant intensity of 5 mW/sr at 20 mA and viewing angle of 100°(X)/40°(Y). Read More

optics & photonics

Photointerrupter offers compact profile, ambient light immunity.

May 15, 2013

Intended for optical switches, digital cameras, and printers, ITR1205ST11A/TR slotted type opto interrupter detects object when it enters gap of slotted switch and blocks light path between emitter and detector. Pb-/Halogens-free solution can be designed to have respective gap and slit widths of 1.1 and 0.3 mm, promoting accuracy and detection sensitivity. Featuring 2.7 mm profile, product consists of IR emitting diode and NPN silicon phototransistor integrated by double molding process. Read More

electrical equipment & systems

Mid-Power LEDs suit light bar and bulb retrofits.

May 10, 2013

Supplied in standard 5630 package, Series 62-217D includes 0.5 W version for 40/60 W bulb retrofits and 0.2 W version for light bars. Both white top-view LEDs are available across complete ANSI CCT range of 2,700&ndash;6,500 K. Units offer minimum CRI of 80Ra and lumen output of 50 lm (WW) and 55 lm (CW). Cool white 0.5 W version is available up to 9,000 K CCT and achieves efficiency of 115 lm/W at 5,700 K. Measuring 5.6 x 3.0 x 0.65 mm, LEDs are Pb-free and RoHS-compliant. Read More

electronic components & devices

Top View White LEDs target mid-power applications.

November 27, 2012

Housed in PLCC-4 package measuring 5.6 x 3.0 x 0.9 mm, 0.5 W Series 62-217B includes 13 versions with typical luminous flux ranging from 40&ndash;60 lumens. Units are available in warm white from 2,700&ndash;3,000 K, neutral white at 4,000 K, and cold white from 5,700&ndash;6,500 K. Pb-free and RoHS-compliant, LEDs are suited for decorative and entertainment lighting, light bars, light tubes, light pipes, indicators, and backlights in offices and family equipment. Read More

sensors, monitors & transducers

Ambient Light/Proximity Sensor targets mobile and smart phones.

November 26, 2012

Combining ambient light and proximity sensor with integrated IR transmitter in DFN package, Model APM-16D25-11-DF8 operates from 2.5&ndash;3.6 V while consuming 90 µA. Proximity sensor, providing refresh time from 10&ndash;270 ms, comes with background noise cancellation algorithm to optimize performance under influence of ambient IR light produced by lamps or sunlight. To closely mimic human eye spectral response, ambient light sensor incorporates special optical filtering. Read More

display & presentation equipment, electrical equipment & systems, vision systems

Through-Hole Dot Matrix Display features customizable design.

November 26, 2012

Driven by packaged IC, ELMM-457SURCB/A3 can be directly interfaced with microprocessor and has serial IC interface that allows display of 104 built-in characters and 24 custom, user-defined characters in 5 x 7 pixel format. LED sources of this programmable, 4-digit alphanumeric module display with flat height of 6.5 mm are configured in 140-dot, 4 x 5 x 7 matrix. Along with brightness controls, features include 3.3 V operating voltage, serial input, and 128 character ASCII format.<br /> Read More

electrical equipment & systems, electronic components & devices

Chip-on-Board LEDs feature low thermal resistance.

May 18, 2012

Available in ANSI 3,000 K CCT as well as all Energy Star/ANSI color temperature ranges, C52 COB LED Series is suitable for directional and decorative applications such as MR lamps and P35 bulbs. Multi-chip 3.7 W LEDs, based on ceramic substrate, feature thermal resistance of less than 1.8°C/W, efficacy of 100 lm/W at 3,000 K CCT, and greater than 80 Ra CRI. Devices can be mounted directly on heat sink, eliminating SMT process and enabling more direct thermal dissipation. Read More

electrical equipment & systems, electronic components & devices

Surface Mount LEDs offer ESD protection up to 8 kV.

April 26, 2012

Housed in ceramic package measuring 3.5 x 3.5 x 0.58 mm, Shwo D Series features standard operating current of 350 mA and can be driven at 1 W. Minimum luminous flux of 1 W units can be up to 110 lm at 6,500K or 80 lm at 3,000K when driven at 350 mA of current. LEDs are suited for variety of applications, such as general illumination, flash, spot, signal, industrial, and commercial lighting. Read More

Other Company News from
Everlight Electronics Co. Ltd.