ThomasNet Industrial Newsroom - Association, Organization & Government News

AASHTO's Executive Director Appears on NBC Nightly News

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Jun 2008 00:00:00 -0500

In an NBC Nightly News interview by correspondent Savannah Guthrie, AASHTO Executive Director John Horsley, when asked about state financial difficulties, said "We're experiencing the perfect storm in terms of maintaining the nation's highways." It was also reported that states are being hit hard by a 63% price jump of diesel fuel in the past year, which runs most of the trucks and equipment state DOTs use for transportation construction.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

Students To Compete For Welding Honors

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Jun 2008 00:00:00 -0500

Part of 2008 FABTECH® International and AWS Welding Show, AWS Skills Competition Weld-Off requires welders to demonstrate their skills by completing standard test weldments, sheet metal projects in aluminum and stainless steel, and pressure vessel welding. Three students will qualify to advance to SkillsUSA U.S. Open Weld Trials in 2009, where winner will receive 4-year scholarship worth $40,000, 4 year AWS membership, AWS Certification, and up to $1,000 in AWS publications.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

ANSI Welcomes New Members

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Jun 2008 00:00:00 -0500

In June 2008, the ANSI welcomed 12 new members into the federation, which represents more than 125,000 companies and over 3.5 million professionals. Said Brian Meincke, director of membership development, "Not only will they gain access to information and business intelligence that is not available elsewhere, but they will also receive discounts on many products and services." He also said members will have a voice and influence over standardization and conformity assessment decisions.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

IPC Releases PCB Industry Results For May 2008

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Jun 2008 00:00:00 -0500

According to North American PCB Statistical Program, rigid PCB shipments are up 5.7% and bookings are down 4.1% in May 2008 from May 2007. Flexible circuit shipments are down 3.5%, while bookings are down 5.0%. Book-to-bill ratio for North American rigid PCB industry in May 2008 declined to 0.95, while flexible circuit book-to-bill ratio climbed above parity to 1.01. For rigid and flexible circuits combined, shipments in May 2008 increased 5.1% from May 2007 and orders booked decreased ...

This story is related to the following:
Services

Search for suppliers of: Trade Associations

Registration Deadline Nears for July 9 Inter-Industry Import Safety Summit

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Jun 2008 00:00:00 -0500

Working in conjunction with 11 leading associations and representatives of President's Interagency Working Group on Import Safety, ANSI is focusing on need to strengthen import safety. At Import Safety Summit on July 9, Joe Bhatia, ANSI president and CEO, will moderate panel, which will address importance of accredited 3rd body certification programs. Panelists will describe why certain existing programs were formed, how they are working, and how products and issues are being tracked.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

ANSI Participates in Sixth ISO Nanotechnology Plenary

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Jun 2008 00:00:00 -0500

On May 26-30, over 125 representatives from 30 countries gathered to advance committee's goals in nanotechnology standardization. Significant outcomes included finalization for Technical Committee to publish technical report out of Working Group 3, health and safety practices in occupational settings relevant to nanotechnologies. TC 229 also agreed to move forward with publication of technical specifications from WG 1, Terminology for Nano-objects: Nanoparticles, Nanoplates, and ...

This story is related to the following:
Services

Search for suppliers of: Trade Associations

ANSI Seeks Comments on AFNOR Anticounterfeiting Tools Standard Proposal

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Jun 2008 00:00:00 -0500

Stakeholders have until August 1, 2008 to submit comments on an Association Francaise de Normalisation proposal for a standard on performance requirements for purpose-built anticounterfeiting tools. The standard would strive to achieve market transparency regarding the reliability and robustness of these systems and would facilitate integration and processing of anticounterfeiting measures in product design.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

NAM Among Major Global Associations Pressing for Strong DOHA Outcome

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 26 Jun 2008 00:00:00 -0500

Agreed upon by major business organizations in 8 countries, joint statement outlines standards by which WTO Doha Round will be judged a success. According to John Engler, NAM President, we need to see real market access in developing countries that are charging bulk of world tariffs through tariff-cutting formula, avoiding exempting entire industries from trade liberalization, obtaining strong participation in sectoral tariff liberalization agreements, and seeing reduction of non-tariff ...

This story is related to the following:
Services

Search for suppliers of: Trade Associations

380,000 Jobs Now in Jeopardy Because Congress Fails to Rescue America's Transportation Account

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 26 Jun 2008 00:00:00 -0500

After Congress failed to fix 3.3 billion dollar deficit in Highway Trust Fund, estimated 380,000 jobs and hundreds of construction projects are in jeopardy. House and Senate dropped provision from 3-month aviation tax extension bill that would have provided $8 billion to keep nation's transportation account solvent. Failure to act sets stage for last minute effort in September and if that does not occur, federal-aid highway program will be reduced by $13.5 and $20 billion.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

Pacific Rim Summit Will Showcase Advanced Biotech Tools for Renewable Fuels and Chemicals

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 26 Jun 2008 00:00:00 -0500

At Pacific Rim Summit, scheduled for Sept 10-12 in Vancouver, research scientists and industry leaders will present progress in developing advanced biotech fuels and chemicals through genomics, synthetic biology, and genetic engineering. Scheduled plenary speaker, Drew Endy, Assistant Professor of Bioengineering at Stanford University, will discuss how new understanding of genomic information is leading to development of new applications for biotech fuels and chemicals.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

Standards Community Convenes at 2008 Open Forum for Standards Developers

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 26 Jun 2008 00:00:00 -0500

At ANSI's 2008 Open Forum for Standards Developers, on June 24-25 in Washington D.C., nearly 99 participants gathered, including 54 that were attending for the first time. Addressing the future of standardization in the U.S. and abroad, it included a panel called Coop-etition, which discussed the need for interoperability of healthcare standards. Several other panels took place with featured speakers that included Mary Saunders of NIST, James H. Turner, and Robert Noth of ANSI.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

ASHRAE Installs New Officers, Directors

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 25 Jun 2008 00:00:00 -0500

At its 2008 Annual Meeting held June 21-25 in Salt Lake City, ASHRAE named William Harrison of Trane Arkansas as President. Officers installed for a 1 yr term are President-Elect Gordon V. R. Holness; Treasurer Lynn G. Bellenger; and VPs Jim Fields, Andrew Persily, Vincent Tse, and Thomas Watson. ASHRAE also installed several regional directors as well as a Region-at-Large Director and 3 professionals to serve as Director-at-Large, all to hold 3 yr terms.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

NAM Chief Economist Says Durable Goods Report Confirms Economy Stuck In "Low Gear"

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 25 Jun 2008 00:00:00 -0500

According to David Huether, report from U.S. Dept of Commerce that orders for durable goods held steady in May is warning sign that domestic economy remains stuck in low gear. Only reason orders did not fall for 3rd consecutive month was 10.2% rise in non-defense aircraft orders. New orders for motor vehicles and parts fell for 6th consecutive month in May, and are down 16.6% since last November. However, machinery, along with fabricated and primary metals, has experienced upswing in ...

This story is related to the following:
Services

Search for suppliers of: Trade Associations

IPC Brussels Meeting on RoHS Revisions Identifies Concerns with Öko-Institut Study

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 25 Jun 2008 00:00:00 -0500

Industry leaders, representing key segments of electronics supply chain, came together at IPC workshop in Brussels on June 18, 2008, to address industry concerns about Oko-Institut report on proposed expansion of RoHS substance restrictions. In draft report to commission, Oko-Institut recommended restriction of Tetrabromobisphenol A, the flame retardant used to protect more than 80% of PCBs. IPC is concerned that Oko-Institut's recommendations are arbitrary and lack sound scientific basis.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

CBO Savings Estimate for Follow-On Biologics

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 25 Jun 2008 00:00:00 -0500

According to Jim Greenwood, BIO President and CEO, CBO report shows that developing pathway to review and approve follow-on biologics will result in cost savings to public and private purchasers of biologic products over 10 year period. Report finds that most savings will be obtained several years after follow-on pathway is established, reinforcing need for Congress to develop and pass responsible pathway this year that protects patient safety and preserves innovation.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

High Performance Building Council Final Report Now Available

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 25 Jun 2008 00:00:00 -0500

The High Performance Building Council (HPBC) has released its final report, entitled <i>Assessment to the U.S. Congress and U.S. Department of Energy on High-Performance Buildings</i>. Publicly available, the report provides a detailed assessment of current voluntary consensus standards and rating systems for high-performance buildings, how they can be used, and what other standards are needed. It was prepared in response to Section 914 of the Energy Policy Act.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

Air Transport Association Calls on Congress to Address Fuel Price Crisis

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 24 Jun 2008 00:00:00 -0500

In testimony before the Senate Committee on Commerce, Science, and Transportation, ATA Executive VP and COO John M. Meenan said that the investments airlines have made to sustain the industry's environmental track record are being threatened by the cost of jet fuel. Meenan also called for Congress to modernize the aging air traffic control system, reinvigorate environmental aeronautics programs, and spur further commercial development of alternative jet fuels.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

FAA Statement on the Aviation Fatigue Management Symposium

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 24 Jun 2008 00:00:00 -0500

Aviation Fatigue Management Symposium, which ran from June 17-19, brought together 325 experts from industry, government, and academia to share most current information on fatigue and discuss possible fatigue management strategies and best practices. Conference included review of factors contributing to fatigue in flight by researchers from NTSB. Participants looked at issues affecting flight and cabin crews, air traffic controllers, technicians, mechanics, dispatchers, and ramp workers.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

Setting Aside the Renewable Fuel Standard Will Not Reduce Corn Prices

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 24 Jun 2008 00:00:00 -0500

The Biotechnology Industry Organization (BIO) submitted comments to the U.S. EPA opposing Texas Gov. Rick Perry's request for a waiver of 50% of the Renewable Fuel Standard (RFS) mandate for production of ethanol from grain. According to BIO President and CEO Jim Greenwood, abandoning the RFS would send a signal to the market that could undercut ongoing research and development in biotechnology that is vital to achieving sustainable production of advanced biofuels.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

Market Transformation Taking Place with Free Advanced Energy Design Guide Downloads

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 24 Jun 2008 00:00:00 -0500

With 100,000 copies in the Advanced Energy Design Guide series in circulation, savings of up to 9 million tons of CO<sub>2</sub> and up to $600 million in energy costs are possible. More than 88,000 of the publications have been obtained via free download since January. The books provide guidance on how to achieve 30% energy savings over building code minimum based on ANSI/ASHRAE/IESNA Standard 90.1-1999 and are available at www.ashrae.org/freeaedg.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

Internships, Apprenticeships Win-Win For Manufacturers, Future Workforce

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 23 Jun 2008 00:00:00 -0500

According to annual talent shortage survey by Manpower, Inc., engineers, machinists, and skilled trade workers were the 3 positions most challenging to fill in 2008. Apprenticeship and internship expose young people to opportunities in manufacturing while companies have chance to recruit, evaluate, and hire needed employees. Since education priorities rarely position manufacturing as preferred career choice, reaching prospective interns and apprentices is half the battle.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

Business Conditions Report: June 2008

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 23 Jun 2008 00:00:00 -0500

According to June 2008 Business Conditions Report, metalforming companies do not anticipate improvement in business conditions in next 3 months and expect little change in incoming orders. Forty-one percent of participants report that shipping levels are below levels of 3 months ago, while 40% report no change. Number of metalforming companies with portion of workforce on short time or layoff remained virtually the same in June at 23%.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

ICALEO® Advance Program Is Now Available!

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 23 Jun 2008 00:00:00 -0500

Advance Program for 27th International Congress on Applications of Lasers and Electro-Optics provides details for technical sessions, poster presentations, Vendor TableTop Display and Reception, and short courses. Participants can connect with laser end-users, suppliers, designers, manufacturers, engineers, researchers, executives, and academic leaders. Program will include Plenary Session, Laser Materials Processing Conference, Laser Microprocessing Conference, and Nanomanufacturing ...

This story is related to the following:
Services

Search for suppliers of: Trade Associations

GRIFS Meeting Fosters International Discussion on RFID Standards Issues

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 23 Jun 2008 00:00:00 -0500

In effort to provide overview of RFID standards activities, Global RFID Interoperability Forum for Standards held its first Open Meeting on June 18, 2008 in Belgium. Discussions centered on increasing interest in RFID technology, which has led to new initiatives as well as new concerns about interoperability of this technology across national and regional borders. Speakers covered global standards, strategies and initiatives, and RFID use in specific industries, such as postal sector.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

Public Power and Major Environmental Group Team Up to Launch Initiative on Energy Efficiency

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 23 Jun 2008 00:00:00 -0500

The APPA and Natural Resources Defense Council (NRDC) announced a joint initiative, uniting APPA's 1,300 member utilities and NRDC's 1.2 million members and activists, to support improvements in electricity efficiency standards for buildings and equipment. The initiative also aims to develop and promote rate-setting policies and programs to achieve efficiency, strengthen the nation's energy efficiency infrastructure, and help APPA members pool resources to take advantage of best practices.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

Outstanding Achievements Recognized at ASHRAE's Annual Meeting

info@productnews.com (ThomasNet Industrial Newsroom) — Sat, 21 Jun 2008 00:00:00 -0500

At 2008 Annual Meeting, ASHRAE recognized 86 members for contributions to ASHRAE and HVAC/R industry. Presidential Member James E. Hill, Ph.D. received Louise and Bill Holladay Distinguished Fellow Award, which honors ASHRAE Fellow for continuous preeminence in engineering or research work. Presidential Member Donald G. Rich received Andrew T. Boggs Service Award, which recognizes past Distinguished Service Award recipient for continuing, unselfish, dedicated, and distinguished service.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

BIO Announces Future BIO International Convention Venues

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 20 Jun 2008 00:00:00 -0500

After successful run in San Diego, BIO announced convention will head to Atlanta in 2009. Convention attracts approximately 20,000 industry leaders and features more than 200,000 sq ft of exhibitions showcasing latest advancements in biotechnology alongside array of potential partners, service providers, and state and international delegations. Organizers project that event will continue to grow year-over-year, reflecting dynamism of international biotechnology sector.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

2008 BIO International Convention Draws Global Industry Leaders and Public Officials for ...

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 20 Jun 2008 00:00:00 -0500

At 2008 BIO International Convention, attendees came from 70 countries and 48 states, and included 20,108 industry leaders, a 36% increase from 2001 convention in San Diego. Four-day program featured 175 breakout sessions, 21 educational tracks, more than 1,000 speakers, 3 keynote sessions, 6 Super Sessions, and 3 CEO Forum sessions. With more than 2,100 companies and more than 208,000 sq ft of exhibition space, convention was largest gathering of biotech exhibitors in history.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

AAMA to Host Door Component Open Forum

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 20 Jun 2008 00:00:00 -0500

On July 8, AAMA Door Component Interchangeability Task Group is hosting all-day open discussion to further development of guidelines for side-hinged entry door component structural substitution/interchangeability. Guidelines will be used by industry to craft procedural guides, certification, and other programs. In addition to members of Task Group, representatives of Association of Millwork Distributors and Window and Door Manufacturers Association have been invited.

This story is related to the following:
Services

Search for suppliers of: Trade Associations

Small Manufacturer Tells Congress of Potential for Expanding Exports

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 19 Jun 2008 00:00:00 -0500

Speaking for NAM, Charles Wetherington, President of BTE Technologies, Inc. told House Committee on Small Business that with help from Washington, small manufacturers can provide dramatic boost to U.S. exports, help reduce trade deficit, and foster job creation. Wetherington said his company is an example of how small domestic manufacturers can grow by expanding exports. Since 2002, company's exports have grown 10 times from 3% of revenues to 35%.

This story is related to the following:
Services

Search for suppliers of: Trade Associations