Jan 18, 2006 Measuring 70 in. tall and 2 in. deep, 3-phase Series VPC2864 provides 30 receptacles and can be configured with 15 A 3-prong receptacles or 20 A T-blade receptacles. Units include current metering on each phase to properly balance and load system. Three-phase power input allows 48 A continuous power at 120 V single phase. Housed in steel enclosure with black powder coat finish, PDUs are vertically mounted, requiring no rack space.

Jan 18, 2006 Rated for 15 A max with service at 125 Vac, Medical-Grade NEMA Socket Strip is available with 4 or 6 covered NEMA 5-15 outlets, accessible only with use of tool. Product also features C14 inlet with connector lock and guard-protected circuit breaker switch. UL-approved to various medical standards, cURus-recognized product is suited for use with equipment in patient contact medical or dental applications.

Jan 18, 2006 With average life of 3,000 hr, M1500B/BUH is rated at 1,500 W and produces 153,000 mean lumens of white light at 4,000 K color temperature. Lamp is rated ANSI M48 for use on 1,500 W metal halide systems that operate lamps in horizontal burn position, ±60°. Areas of use include stadiums, athletic fields, arenas, convention centers, race tracks, marinas, amusement parks, and other floodlighting applications.

Jan 18, 2006 Using less than 2 W of power, PlantLED light bars produce colors of light plants use most efficiently to promote their growth and health. Products run on less than 20 V of electricity and produce low-heat output (warm to touch). Measuring 21 x 2.5 in, LED bars do not require ballast or secondary reflector. With conical light output, light bars are placed 12-18 in. away from growing plant, no closer than 3 in. for seedlings, and 24-36 in. away from full grown plant.

Jan 18, 2006 Half-brick HHS04-520 module generates optimum isolated hub voltage to power minimum of 13 PoE-enabled devices, more if devices take less than max allowed power of 12.95 W. Featuring 2,250 Vdc isolation, single output converter complies with IEE802.3af standard and delivers efficiency of 92% at 52.5 V, 200 W output. It accepts input voltage from 36-75 V and has 2.40 x 2.28 x 0.43 in. open frame design with industry standard pin-out.

Jan 18, 2006 Stand-up, PC-mount Model AZ2501 handles heavy loads up to 13,850 Va, 50 A at 277 Vac, making it suited for applications such as HVAC-R, UPS systems, lighting controls, industrial heating, and spa controls. Unit features dielectric strength of 4,000 Vrms contact to coil and 50 ms pulse to Set or Reset. Optional manual switch and PCB retaining stud are available.

Jan 18, 2006 Designed to supply digital baseband and multimedia processors in portable applications, STw4141 allows 2 different output voltages to be generated using one external coil. Complete power supply subsystem solution can be implemented in 56 mm² PCB area. Based on voltage-mode buck architecture, chip maintains efficiency of up to 92% over I/O output currents from under 10 mA to 200 mA max. During full power operation, device operates in externally synchronized or fixed frequency PWM mode.

Jan 18, 2006 In case of line or equipment failure, T-APS-R-15 chassis and T-APS-R card system provides automatic failover switching protection for sites with up to 15 complete, independent primary, and redundant T-1 or E-1 circuits. System, also manageable via SNMP, Telnet, or serial interface, enables switches can be used in several configurations. Each card operates independently, monitoring T-1 or E-1 circuits and determining best path as based on user-supplied parameters.

Jan 18, 2006 Signal conditioning module, Model 4105, provides analog output as 0-1 mA, 4-20 mA, or 0-5 V. Connection to data transmitter or measurement system consists of 10-33 Vdc continuous power, ground, and read signal from 5-33 Vdc that enables analog output. With read signal enabled, power consumption increases to sum of current output and additional 4 mA max. With read signal disabled, current drops to less than 2 mA.

Jan 18, 2006 Suited for front and rear mounting, lead-free 3 and 5 mm Panel Mount LEDs install in holes from 0.156-0.312 in. and are available with variety of options including custom lead lengths, high temperature insulation, internal resistors, and connector terminations. Sealed against water and dust, LEDs are suited for demanding outdoor applications. Housings come in blue, green, red, yellow, white, and clear for use with single color, bicolor, and tricolor LEDs.

Jan 18, 2006 Suited for commercial use in OEM and consumer products, QUEST(TM) series Kwik-Lok(TM) Positive Locking Pins offer positive locking feature and 303 stainless steel pin body construction. T-Handle style has plastic handle made of polycarbonate resin for resistance to impact, low-temperatures, and chemicals. Available with ½-6 in. or 10-100 mm grip lengths, standard sizes range from 3/16-1 in. or 5-25 mm nominal pin diameters.

Jan 18, 2006 Die-spring actuated True-Strip(TM) fits directly on to industrial standard retainers with one screw and complies with all NAAMS specifications. Anti-loosening thread locking patch minimizes chance of loosening during operation. Available in 7 inch and metric ball-lock shank diameters, self-contained stripping device features flanged steel can that is precision machined and burnished from pre-hardened steel and black-oxidized for corrosion resistance.

Jan 18, 2006 Automatic, in-line Super Sewer is designed for on-demand photo books, yearbooks, journals, children's books, and books under ½ in. thick. Operated with touch screen control panel, machine does reverse stitch on head and foot of book block, ensuring strong side sew that will not come apart. Super Sewer handles books ranging in size from 6 x 8 in. to 11 x 14 in. and can sew up to 10 books per minute.

Jan 18, 2006 Infinitely adjustable APS-438 Air-Powered Saw and FlexTrack® system features track sections that create secure system that mounts to tank or pipe via tack welds. Gliding along track system on trolley with 4 V-grooved, stainless steel roll guides, saw is fully supported and produces square cuts within ±1/16 in. with no heat affected zone. Diamond tipped steel and fiberglass reinforced abrasive cutting blades come in 8, 10, and 12 in. dia sizes.

Jan 18, 2006 RIBS (Robotically Integrated Bending Solutions) system brings robot into coordinated motion with any brand of down-acting CNC hydraulic press brake. In addition to process verification through virtual 3D interface, system provides full utilization of press brake. It provides tools for programming entire process and uses standard CAD files for parts. Included SimulEasy software lets user program entire bend sequence offline and upload program into press brake and robot.

Jan 18, 2006 Equipped with 6.6 A motors and 750 W of input power, SuperDrive Models W6V4SD and W6VB3SD can fasten screws measuring ¾-3 in. With no-load speeds of 0-4,500 and 0-2,600 rpm, they provide max torque of 81.5 and 139.6 lb-in., respectively. Suitable for jobs ranging from sub floors to fastening decks, systems are available with screwdriver, 20 in. extension, SuperDrive module, LOX and Phillips bits, sub floor and drywall nosepieces, and Cordura carrying bag.

Jan 18, 2006 Ontra Presentations v4.1 creates slideshows with multimedia content and provides communications platform with which to manage all aspects of sales and marketing process. By incorporating business functionality into presentation software, product addresses needs of entire organization. Software manages print, web, and audio visual collateral in searchable database, enabling entire sales team to access resources and present consistent brand identity.

Jan 18, 2006 Designed for industrial manufacturing or product inspection applications, LP5 mast lift travels on rail and extends 3 ft from wall in retracted position. Work platform can be extended horizontally to provide max reach of 6 ft with standard basket. Offered in platform heights from 10-15 ft, product provides max working height of 21 ft and lifting capacities to 350 lb. Features include self-closing gates, hand controls for up/down movement, and foot control for lateral positioning.

Jan 18, 2006 Featuring rib design that maximizes absorption, VG Series is installed by hand and provides energy control in minimal space. Molded in black synthetic rubber, RoHS-compliant unit offers minimal material migration from grommet to printed circuit board.

Jan 18, 2006 Featuring drive technology via linear motors, Condor 500 includes Soft Landing tool and optional integrated boundary-scan. Comprehensive software facilitates test program development directly from CAD data and parts lists. Off-line simulation, panels, and different versions of PC-boards are supported. Test electronics allow in-circuit and functional test, opens check, memory test/and programming, boundary-scan, and vision.

Jan 18, 2006 Providing permanent means of fall protection for hatch openings, BIL-Guard(TM) Hatch Railing System mounts directly to capflashing of any brand of roof hatch. Attachment system does not penetrate roofing membrane and is installed using basic tools. System is constructed of fiber reinforced polymer material with molded-in, high-visibility yellow color for safety. Self-closing gate ensures continuous fall protection and maintains OSHA compliance.

Jan 18, 2006 Richter UniGrav(TM) system, complete with keyboard and controller, interfaces with existing Windows® 95/98/NT systems using included SIGNUMERIC software, which can be used to create required marking program. Machine uses roll marker clamping and locating technology with peen marking head. System design permits user to use servo or stepper motor drive for marking capabilities up to 10 or 5 characters/sec with 0.005 or 0.02 mm positioning accuracy.

Jan 18, 2006 Acting as gateway between RS-232/422/485 serial port and 10/100Base-T Ethernet port, A3000 allows any host computer access to serial port as virtual COM port via IP address without any modification of end-user software. Serial to Ethernet converter also acts as Internet server, allowing direct connection to applications via serial port. Communicating at baud rates from 50 bps to 460 kbps, product comes in 4.5 X 2.85 X 1.0 in. steel case that can be wall-mounted.

Jan 18, 2006 Utilizing centrifugal separation, Alfie 500 removes contaminants from metalworking systems. Metalworking coolant cleaning module, dimensioned to handle volumes up to 1,500 gal, is designed to operate at standstill or during production run without interrupting machining process. Mobile, plug-and-play system separates tramp oil as well as metal fines and solid particles down to 1 µm from coolant. All functions are controlled by PLC-based system.

Jan 18, 2006 Delivering servo control of NEMA 17 and 23 frame microstep motors, SilverDust(TM) controller/driver features Programmable Limit Switch (PLS) output that can be configured to use any of the available 23 I/O to change states at over 150 pre-defined trigger points. A modulo may be selected to repeat cycle. Output triggering, trigger point values, and number of trigger points can be changed even while PLS command is running in background.

Jan 18, 2006 Not using any signature bases, Anti-keylogger(TM) v7.1 guards against known and unknown keylogging programs possibly included in commercial, shareware, or freeware products as well as Trojan horses and other viruses. It ensures spyware is not able to record and steal sensitive information from Microsoft® Windows® 2000/XP Workstations. Working transparently, software offers full UNICODE support and protects against clipboad, keystroke, and windows text capturing.

Jan 18, 2006 Suited for rotary, linear, and laser position sensing, 4-channel 7264 SSI interface module plugs into PLC for immediate performance. It is configurable directly from PLC's output registers for variety of sensors and unique data interface requirements. Resolution is limited to that of corresponding SSI sensor, and each module provides user with scaled data, actual SSI data, and velocity data. Other features include position preset and programmable count direction.

Jan 18, 2006 Engineered for those forging high-silicon aluminum alloys, non-graphite, water-based Grade FW-3777 eliminates flash fire and minimizes smoke and undesirable odors in forging applications. It does not build up in die cavities and provides optimal metal movement and anti-solder properties. Product dilutes with water, and there is no settling of concentrate, and no mixing required. When spray-applied, lubricant produces uniform coating.

Jan 18, 2006 Featuring 90 nm technology, Model ST-D2000 decodes and displays analog and digital broadcasts, while eliminating multi-path interference and adjacent-channel noise. It can decode 2 simultaneous SD signals, as well as provide HD decompression, video processing, and display for CRT or flat-panel TVs. Contour-Sensitive De-interlacing(TM) uses pixel-based video analysis, adaptive pixel interpolation, and field merging to eliminate negative effects of interlaced coding.

Jan 18, 2006 Suited for painting walls and ceilings, Autofeed Cordless Painting System is equipped with 9 in. roller, 2-speed paint flow control, and 0.8 gal capacity container that can be filled with almost any type of water-based emulsion or vinyl paint. Container holds enough paint to cover 4 walls of 12 x 9 ft room without need to refill. Average usage time is 12-15 hours using 4 D size standard batteries and 50-60 hours with alkaline batteries.

Jan 18, 2006 Manufactured in PBGA 569 package, STW51000 SoC baseband processor provides turnkey solution for mobile WiMAX standard (802.16e) base-station modems. It combines 2 quad-MAC DSP cores, each running at 600 MHz, with 300 MHz ARM926 RISC core; 16 Mbit embedded SRAM memory; and dedicated channel decoding co-processor. Suited for wireless infrastructure applications, product comes bundled with software libraries, including 802.16e software for FDD and TDD modes.

Jan 18, 2006 TsiLang Components Suite v6.0.1, suited for software developers who use Borland® Delphi(TM), C++Builder(TM), or Kylix(TM) platforms, helps localize software applications for worldwide distribution. Offering internal and external localization choices, software gives users access to Global Public Translation Database and supports all world languages. After component is dropped onto form and translation for user interface terms is entered, active language can be changed on-the-fly.

Jan 18, 2006 Blade Readiness Assessment Service determines feasibility of successfully deploying blade servers within current data center installations. Service takes into account data center NCPI components such as power, cooling, facility, and rack capabilities as well as management systems. For each assessment, service provides report that identifies constraints and offers power and cooling enhancement options as well as optimal blade deployment strategies.

Jan 18, 2006 Available in 128 MB, 256 MB, 512 MB, 1 GB, and 2 GB, CF Cards operate from -40 to +85°C for industrial applications. Units are constructed with Samsung NAND-type SLC flash memory devices paired with 32-bit RISC/DSP-based system controller. They are True IDE Mode and ATA-3 compliant, making them compatible with various operating systems. Cards offer 2 million program/erase cycles and unlimited reads while maintaining transfer speeds up to 16.6 Mbps in burst mode.

Jan 18, 2006 Thermakrete(TM) urethane coating shields industrial floors against thermal shock in -10 to +240°F temperature range. Capable of seamlessly expanding and contracting to resist cracking, it withstands caustic washdowns, heavy traffic, abrasion, chemicals, and standing water contamination. Each 3-component kit cures in less than 72 hr without need for primer or sealers. Available in 3/16 or ¼ in. thicknesses, it can be used in USDA facilities based on FSIS Directive 11,000.4.

Jan 18, 2006 Providing UHF and VHF output, RFModeler can modulate transport stream in DVB-T and DVB-H modes, merge clean broadcast quality signal with mastered level of white noise, overlap terrestrial signal with multipath echoes, and set fading level. It handles 5-8 MHz bandwidth; 2k, 4k and 8k FFT size; TPS signalization; and hierarchical mode. Modulator can synchronize either directly from data input source or from external 10 MHz clock source.

Jan 18, 2006 Business Continuity Management System v4.2.0 assists all size enterprises with development of formal business continuity plans. It provides series of pre-defined stages to manage planning process from concept and initiation to testing and maintenance. Program helps organizations understand and manage risk, conduct business impact analysis, analyze facilities, develop procedures for recovery tasks, and track training of management and employees.

Jan 18, 2006 With intuitive user interface, tutorial movies, and ability to plan, schedule, and record work, w/Ease v1.5 assists small business owner in establishing sound business management practices. Using interactive scheduling calendar, users can schedule jobs and projects, schedule invoices, and record notes and reminders. Additional features include overview of customer account activities, tracking of completed work, and storing inventory information.

Jan 18, 2006 Combining forged aluminum body with removable forged plated brass spray head, Model MBC-510 applies coatings for protection against corrosive environments such as in- and off-shore oil production industry. Gun features cartridge type air valve, large air and fluid passages for minimized cleaning time, and compatibility with variety of air caps and fluid nozzles.

Jan 18, 2006 Neonatal Secure ID(TM) provides platform for point-of-care barcoding and further ensures mother/child identification process. Band is latex-free, virtually indestructible, patient comfortable, and easily read. Points of administration include birthing wards, delivery rooms, maternity wards, neonatal intensive care units, and obstetric wards.

Jan 18, 2006 Intended for those who want to learn Spanish from beginning, or review former knowledge of Spanish, Windows-based StartSpanish(TM) contains brief yet comprehensive explanations of most important parts of Spanish grammar, combined with interactive exercises to help user get firm grip on language. Users read explanations about each topic, then complete exercises before proceeding to next topic. Guide to pronunciation is included.

Jan 18, 2006 Along with SNMP-based management software, BOSaNOVA XTC-1000 Thin Client delivers biometric and dual monitor support. XP-based unit offers wired or wireless (802.11g) communications and supports PCI and PCMCIA expansion standards. Features include 4 USB 2.0 ports, DVI video capability, and optical mouse and PC keyboard. Also included are Flash Player v10, Adobe Acrobat Reader v7, Media Player v10, XPe SP2, and Shockwave v10.

Jan 18, 2006 Designed for short-term personal gas monitoring needs, GasBadge® Plus provides protection from dangerous levels of carbon monoxide, hydrogen sulfide, oxygen, nitrogen dioxide, or sulfur dioxide. Unit weighs 2.5 oz and employs top-mounted sensor for continuous, unobstructed protection. Along with user-adjustable alarm and calibration gas setpoints, product features event-logger that records past 15 alarm events; audible, vibrating, and visual alarms; and backlit LCD display.

Jan 18, 2006 Designed for field-termination of pressure transducers, Model 299 Dri-Sense reduces failure caused by humidity migrating down cable and causing short circuit. Desiccant material contained within cover captures and condenses moisture, turning from blue to pink to indicate desiccant status. Desiccant can be regenerated by baking at 200°F until returned to blue (3-4 hr). Enclosure, constructed of plastic glass-filled polycarbonate, also protects against surges to 2,000 V.

Jan 18, 2006 Detectamet Metal Detectable Plastic Pens are manufactured from high impact, food contact approved plastic and are rejectable by metal detection systems used in food and pharmaceutical industries. Featuring retractable nib and reinforced clip with incorporated hole to locate 20 mm split ring and safety chain, pens are x-ray visible and available in blue, red, green, yellow and black.